0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How is static electricity used in making sandpaper?
It holds the grit on the paper before the adhesive can set.
Simple way of explaining surface roughness?
Generally surface roughness increases friction. For example, take a piece of course sandpaper and rub it on a piece of wood. The smooth side will slide easier to slide on the wood than the rough side.Then you might ask why Indy Car tires are smooth.Groves were put in tires to wick water away from between the surface of the road and the tire to prevent hydroplaning.Indy tires are run on dry surfaces. And, the lack of groves increases the surface area. Also note they use very very grippy rubber, kind of like the paper separation rollers on a laser printer.Another exception might be that very smooth, flat items stuck together can form a seal, with or without the presence of a lubricant like grease or water. A seal can increase friction more than would otherwise be expected.Surface roughness or imperfections can break the seal and decrease friction.One final note is that the surface dimpling on a golf ball might actually help make a static air buffer around the golf ball and decrease it's air friction.
How do you remove scuffs from urethane without making the floor shine?
By choosing the proper grade of sandpaper. You'll need a grit aggressive enough to remove scuffs - not so aggressive that it removes the finish completely, but not so fine that it polishes the floor instead. I'd start with a 220-grit and see if that works. If it's too dull once the scuffs are gone, switch to a 300-400 to polish it a bit. If it still doesn't remove scuffs, go down a bit to maybe 180. I wouldn't go any lower, or you risk removing finish altogether. Once scuffs are gone, it would be wise to reapply a new coat of finish to those areas to protect from further damage and to keep dirt from getting ground into the sanded areas.
What is microfiber?
Microfibers are tiny fibers that have been slit into millions of finer fibers that are no thicker than one hundredth of a human hair. The special slitting process produces an ultra-fine fiber with wedge shape filaments and a core of nylon. The wedge shape, the nylon core, and the smaller size fiber are the key to their effectiveness. When these tiny fibers are woven together into a cloth through a unique weaving method, the result is a powerful cleaning tool. Each cloth consists of tens of thousands of tiny storage compartments that lift the dirt up, trap the waste and leave a clean streak-free surface. Thy nylon core within the microfiber form tiny cutting edges that break up surface dirt and easily absorb and remove oils and other grimy substances. The only solvent you need is water!Microfiber is a fiber with less than 1 denierper filament. (Denier is a measure of linear density and is commonly used to describe the size of a fiber or filament. Nine thousand meters of a 1-denier fiber weigh one gram.) Fibers are combined to create yarns. Yarns are knitted or woven in a variety of constructions. While many microfibers are made of polyester, they can also be composed of polyamideor other polymers.HistoryProduction of ultra-fine fibers (less than 0.7 denier) dates back to the late 1950s, using melt-blown spinning and flash spinning techniques. However, only fine staples of random length could be manufactured and very few applications could be found[1]. Experiments to produce ultra-fine fibers of a continuous filament type were made subsequently, the most promising of which were run in Japan during the 1960s by Dr. Miyoshi Okamoto[2]. Okamoto's discoveries, together with those of Dr. Toyohiko Hikota, resulted in many industrial applications. Among these was Ultrasuede (also known as Alcantara), one of the first successful synthetic microfibers, which found its way onto the market in the 1970s. Microfiber use in the textile industry then expanded[3]. Microfibers were first publicized in the early 1990s in Sweden, and saw success as a product in Europeover the course of the decade.[4]In 2007, Rubbermaid began a line of microfiber products for American markets, the first major company to do so.Functional uses & MarketHousehold Cleaning and Commercial Cleaning MarketMicrofiber products used for consumer cleaning are generally constructed from split conjugated fibers of polyester and [[polyamide]]. Microfiber used for commercial cleaning products also include many products constructed of 100% polyester microfiber. Fabrics made with microfibers are exceptionally soft and hold their shape well. When high-quality microfiber is combined with the right knitting process, it creates an extremely effective cleaning material. This material can hold up to seven times its weight in water. Microfiber products have exceptional ability to absorb oils, and are not hard enough to scratch even paintwork unless they have retained grit or hard particles from previous use.Microfiber is used in many professional cleaning applications, for example in mops and cleaning cloths. Although microfiber mops cost more than non-microfiber mops, they may be more economical because they last longer and require less effort to use. Car ,Automobile Detailing and washing MarketMicrofiber is widely used by car detailers to handle tasks such as removing wax from paintwork, quick detailing, cleaning interior, cleaning glass, and drying. Due to their fine fibers which leave no lint or dust, microfiber towels are used by car detailers and enthusiasts in a similar manner to a chamois leather.Reducing BacteriaMicrofiber textiles designed for cleaning clean on a microscopic scale. According to tests using microfiber materials to clean a surface leads to reducing the number of bacteria by 99%, whereas a conventional cleaning material reduces this number only by 33%.[11] Microfiber cleaning tools also absorb fat and grease and their electrostatic properties give them a high dust-attracting power[citation needed].Microfiber cloths are used to clean photographic lenses as they absorb oily matter without being abrasive or leaving a residue, and are sold by major manufacturers such as Sinar,[12] Nikon and Canon. Small microfiber cleaning cloths are commonly sold for cleaning computer screens and eyeglassesNoticeMicrofiber is unsuitable for some cleaning applications as it accumulates dust, debris, and particles. Sensitive surfaces (such as all high-tech coated surfaces e.g. CRT, LCD and plasma screens) can easily be damaged by a microfiber cloth if it has picked up grit or other abrasive particles during use. The cloth itself is generally safer to use on these surfaces than other cloths, particularly as it requires no cleaning fluid. One way to minimize the risk of damage to flat surfaces is to use a flat, non-rugged microfiber cloth, as these tend to be less prone to retaining grit.Cleaning textiles made of microfiber must only be washed in regular washing detergent, not oily, self-softening, soap-based detergents. Fabric softener must not be used. The oils in the softener and self-softening detergents will clog up the fibers and make them less effective until the oils are washed out.Environmental and safety issuesFor most cleaning applications they are designed for repeated use rather than being discarded after use[4] (an exception is the precise cleaning of optical components where a 'wet' cloth is drawn once across the object and must not be used again as the debris collected and now embedded in the cloth may scratch the optical surface). In many household cleaning applications (washing floors, furniture, etc.) microfiber cleaning fabrics can be used without detergents or cleaning solutions which would otherwise be needed.More Articles are available here!www.sinrida.com
Why do they grit the roads?
Local or state roads crews sprinkle "grit", which normally consists of small stones, dust, or ash to increase traction on a roadway. On a snowy hill or turn grit can give a vehicle a better chanceof staying on course.
How much salt in road grit?
Grit, used to clear snowy and icy surfaces of snow and ice, is actually 100% salt. They stopped using grit to clear roads in the 1920s.
What does grit do to ice?
No The salt in the mixture does The grit is used for grip after the ice melts
What rock or mineral is used to melt ice on streets and sidewalks?
In the UK, it is known as rock salt. The rock salt (the dried remains of ancient seas) is an underground deposit of salt that is mined and used to grit icy roads and pavements.
Is concrete sealer slippery when wet?
There are also treatment solutions to increase friction on tiles and concrete. Call the SlipDoctors. 888-436-5404 We make sealers that have a "coarse" grit in them. Just apply with a roller. Check out our website and feel free to contact me for more information. The link is below under "Related Links"
Where do you get grit?
you get grit from Sweden
What happens in a grit chamber?
in a grit chamber mixing of grit takes place.after grit mixing only organic matter remains
When was The Grit created?
The Grit was created in 1986.
What scooter is better grit elite 2 or grit fluxx?
Grit Elite 2 is better!
What is grit?
Grit can be defined as particles of sand or dirt that is loose. Grit can also mean the strength of one's character.
What does grit do for budgies?
grit holds down budgies food and is very healthy for budgies deit.
When was Grit Breuer born?
Grit Breuer was born in 1972.
