0
You can go online to SF Gate and they have How to Install a Light Post in 17 Easy Steps. The website, This Old House also has a step by step guide to Installing a Light Post that is very easy to follow.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
When installing field fence which side of the post does the fence go on?
Usually the posts go on the side of the fence of the person installing it. This is especially true if you build a wooden fence. If the post are on the neighbors side then their kids could be climbing up and down on the fence. I personally would want this. Good luck.
How do you reset check engine light on 2004 cavalier?
depends why the light came on. Try taking off the gas cap, cleaning the seal and re-installing until it ratchets. Light may go out after about 10 starts. If light doesn't go out, you need a code reader to reset, or go to dealer.
How would one go about installing emergency LED lights in their home?
Installing emergency LED lights in one's home can be a complicated process. The best way to go about this is to hire a professional electrician who knows the proper safety measures and building codes.
Where does the wires go when installing alternator on 1980 Datsun 280z?
Red Positive goes to Battery Positive and the small lead goes to the ignition light bulb in the dash which Will be negative until starts charging which will be positive and the light will go out
Where can one learn about installing interior walls?
There are different ways how one can learn about installing interior walls. On the one hand one can go to a company which specialised on buliding houses and ask for help. On the other hand there are many Do-it-yourself videos on the internet.
How do you turn off abs light on vw beetle?
disconnect the positive battery post and wait five minutes , then reconnect battery. The light should go out
Where do the syllables go in light?
Light is one syllable. There are no divisions.
How might a person go about installing a big pond on their property?
One might first contact one's local building store and ask for opinions and advice regarding installing a pond. There is also much useful information on the internet one might want to look up.
How much interest in rd account per annam?
It depends on the bank you open rd account. in post offices it is around 9%. Go through the below link for knowing more on installing http://amisha2blog.blogspot.com/
Test Solenoid for mtd 18hp brigg and stratton motor?
If you are trying to test your starter solenoid here is one way you can test it:Get a 12V test light from any auto parts store.With all these steps you will need to have someone seated on the mower, have the deck arm all the way in the up position and the clutch pedal all the way down. This should make all the safety switches activate and the solenoid should be working.1) Hook up the clip end to the "-" or Neg side of the battery, then touch the pointed end to the big post of the solenoid which has the battery cable from the battery. It should light up the test light. If it doesn't then you have a bad battery cable or a bad battery. If it does light up go to #2.2) With the clipped end on the Neg battery post, touch the pointed end to the other big post on the solenoid that has the cable going to the starter. While holding the test light on this post try to crank over the engine. If the test light lights up the solenoid is fine. You either have a bad cable to the starter, a bad starter or a bad ground in your system. If it does not light up go to #3.3) With the clipped end on the Neg battery post touch the small post of the solenoid. While holding the test light on this post try to crank over the engine. If the test light lights up then the ignition wiring to the solenoid is fine. If the solenoid has only one small post and the test light lights up here and not on the big post to the start then you have a bad solenoid. If it does not light up then you have a wiring problem other than the solenoid. It could be an ignition switch or a safety switch. If your solenoid has two small posts then one of them is a grounding post and we need to make sure you are getting a ground to activate the solenoid. If this is the issues go to #44) Hook the clipped end of your test light to the "+" or POS side of your battery and touch the pointed end of the test light to the second post and see if it lights up. If it doesn't then you have a wiring or safety switch issue.
What happens to the light bulbs when one is disconnected?
It depends on the light bulbs. Some will all go out once one is disconnected and only that one that got disconnected will go out.
How do you post adds on your YouTube channel?
Go to your account the one with videos and stuff, then go to settings, title. Then write stuff there but if you want to post an advertisement, Youtube will request you (you have to be popular)
