If the stone is insoluble the boiling point is unchanged.
Adding salt to water increases the boiling point of the water. This is because the salt disrupts the normal boiling process by reducing the vapor pressure of the water, requiring a higher temperature to boil.
Boiling water does not affect the hardness of water. Hardness in water is caused by minerals like calcium and magnesium, which remain in the water even after boiling.
For boiling and evaporaton solutes of water counts.
Chlorine in water can affect the boiling process by increasing the boiling point of water. This means that water with chlorine will need to be heated to a higher temperature before it boils compared to water without chlorine.
it lowers the boiling pt temperature
It increases its boiling point and its density.
what is the effect of the addition of a non volatile solute to the boiling point of water?
How do verify the temperature of the stones if you use boiling water? With boiling water the stones will be too hot an burn your hands and skin of your client!
The two main factors that affect the boiling point of water are the atmospheric pressure and the presence of impurities in the water. As atmospheric pressure increases, the boiling point of water also increases. Impurities in water, such as salt, can raise the boiling point of water due to the change in the composition of the solution.
The presence of hard water can affect the process of boiling water by causing mineral deposits to form on the heating element or inside the pot. This can reduce the efficiency of heat transfer and increase the time it takes for the water to reach boiling temperature.
No but it will take longer for all the water to heat up, if it where less it would be faster for it to get to 100 degrees C.
The boiling point of a liquid is elevated when this liquid contain impurities.