It does not tip up. Cab slides forward. Procedure in op manuel
Remove pins from rods at hyd controll valve. remove pins from cables clevis just before pullys for brake lock pins.remove two bolts for cab in front at feet area . then two bolt behind cab in area of up right frame. Disconnect throttle rod below handle has quick disconnect. Unplug electric connectors under seat area.DIsconnect both control linkages at hydro pumps controls leaver on pumps, leakage will all move forward with cab. now cab can be rolled forward may have to use bar from rear. ps. seen many bend arms on injection pumps because it got forgotten to unhook it before move cab forward and if cab mounted heater will have to remove hoses.
Case 1845C weight is 5860# I suppose that is with bucket, and fluids full.
low cab forward
What year was this 1845C made *JAF0161779*
There are two models of the 1845c, both called 1845c unfortunately. The newer model, made subsequent to the original platform allows for a much easier task. Which model are you asking about?
compare the movement of the slide, left and right or forward and backward to the movement of the eyepiece image? compare the movement of the slide, left and right or forward and backward to the movement of the eyepiece image? compare the movement of the slide, left and right or forward and backward to the movement of the eyepiece image?
A cab over engine truck is a truck where the driver's cab is on top of the engine. When the engine needs to be repaired, guess what happens? The whole cab tips forward to give the mechanic a look.
It is up in the driver's side frame rail behind the cab. You will have to slide up under the truck to see it.
Safety on pull slide back and lift up slide forward
From inside the cab, pull the Left and Right corner of plastic cover (gentle not to break it) Cover should slide out and expose the light and wires, the rest is just straight forward.
pull the slide back put the clip in and push the slide forward and shoot!