Air conditioning air/fuel ratio sensor automatic transmission/transaxle manual, sensor idle air control data link connector generator barometric air pressure sensor long term.
Above is not an answer.
Dpfe sensor is the delta (differential) pressure feedback egr (exhaust gas recirculation) it monitors the pressure on the egr valve to make sure it is working.
Transmission slipping from 2nd to 3rd gear in your 1983 Oldsmobile Delta 88 could be due to low transmission fluid levels, which can cause inadequate hydraulic pressure. It might also be a sign of worn transmission bands or clutches that are failing to engage properly. Additionally, a malfunctioning governor or a problem with the transmission control module could be contributing to the issue. It's advisable to have the transmission inspected by a professional to diagnose and address the problem accurately.
change the delta pressure feedback sensor.
it is used in voice transmission,to active vibration control and is used in channel vocoder
The Star-Delta control circuit diagram shows the delta contact and the main contact.
Delta pressure can be calculated using the formula: [ \Delta P = P_1 - P_2 ] where ( \Delta P ) is the change in pressure, ( P_1 ) is the initial pressure, and ( P_2 ) is the final pressure. This formula is applicable in various contexts, including fluid dynamics and engineering, to determine the difference in pressure between two points in a system.
I'm pretty sure its when the pressure remains constant. When the pressure is constant: q=delta U + P delta V The equation for delta H is: delta H = delta U +P delta V Therefore, when pressure is constant: delta H = q I think...
control sit ?
It is a slang tern given to a Differential Pressure Sensor or Transducer.
Use a delta-p gauge
try replacing the delta pressure feedback sensor. this fixed my explorer.Or you can try replacing the relay.
Diaphragm delta P refers to the pressure difference across a diaphragm, which is typically used in pressure measurement applications. It is the difference in pressure between the two sides of the diaphragm and is a key parameter in determining the output signal from pressure sensors.