Need to know what side you are working on. The driver side just snaps in.
It has a lock ring on the end of the axel shaft.
If you took the passanger side axel out of the housing, Then a big flat shim has fallen out on you and down in the housing. You will have to take the axel housing tube loose from the center Differential. Theres 4-5 bolts beside the 4x4 Actuator
That needs removed to take apart. That will let the housing that the axel goes in come off, I forgot theres 2 bolts that hold the housing to the frame, Remove those too. Then find washer and put heavy grease on it and put it back in place,
It goes over the end of the axel shaft. Good luck
yes
The length of the 1991 Chevy 1500 transmission is 37 inches. The bell housing will account for approximately 5.5 inches.
It sure will.
What is the overall height, width and length of a 1991 Chevy 1500?
yes, V-8 ???
That would be the 700R4
700R4 from the factory.
1988 through 1999 Chevy TRUCKS have the same chassis
It is under the edge of the drivers side dash.
In the gas tank.
It is inside of the fuel tank.
follow the red wire from the battery