Want this question answered?
The filament inside is heated. Once it gets hot enough, it dissipates some of the energy as heat and light.
No, only the resistance of the filament counts (normally marked as "wattage" on the bulb).
The heater element is thicker wire, and has lower resistance. It still has enough resistance to glow red hot (producing heat) but does not glow white-hot and very brightly like a light bulb filament. Also, it lasts almost indeifnitely. whereas the light bulb filament has a finite life - it will "burn out" sooner or later.
You you break a glow stick it will be shorter in size and may not glow well.
No, copper wire cannot be used to make the filament of an electric bulb as copper wire has very low resistance. Therefore, the bulb will not glow if current is passed. It would also melt - the filament has to be white-hot to be any use!
they glow
incandescent lights
Yes, the resistance of the filament of a light bulb is what generates enough heat to make the filament glow and produce light.
A fused bulb does not glow because the filament of a fused bulb is broken. Since current can't flow through the filament, it can't get hot enough to glow.
The light glows because of the hot Filament.
The filament inside is heated. Once it gets hot enough, it dissipates some of the energy as heat and light.
No, the broken filament breaks the connection which electricity needs to complete the circuit.
Incandescence. The filament is heated by the electricity moving through it, this causes the filament to heat up, and the heat causes the familiar glow.
Mainly to prevent the filament, the glow wire from burning up.
yes
Mainly to prevent the filament, the glow wire from burning up.
The flow of electrons from the battery flow through the filament in the bulb causing it to get hot and glow thus producing light.