6000 revolutions is concidered the beguining of hi stress of a 4 cycle combustion engine. you can see how fast your belt is spining looking at the tachometer wich most cars have. It tells you how many revolutions that engine is per minute. Anything from 500 - 800 revolutions is concidered the slowest speed wich an engine needs to stay on.
It is belt driven, so it will spin whenever the engine is running.It is belt driven, so it will spin whenever the engine is running.
There is no such bowling style as 'fast in spin' or 'fast out spin in'.
hi there if the timing belt goes on the mx5 it does not damage the the headand the bottem will free spin when you turn it over on the key
If the timing belt went as in broke/stopped working, I don't think your engine would start. The timing belt controls the camshafts which actuate the intake and exhaust valves. Neons have an interferance engine if the timing belt broke you possibly have bent valves and the engine will spin over very fast and you will have no compression. That's probably not what you want to hear though. Cross your fingers.
could be the coil pack but did u check the timing belt .does it spin real fast, belt could be broken thus no spark
Sounds like the pulley that spins the blade is stuck. When the blade is lowered, the belt tightens on the pulley and spins it. If the pulley is stuck, it will not spin and the belt will "squeal" as it tries to spin it. The extra load that is added to the engine when the belt is trying to spin the stuck pulley is a bigger load than the engine can handle, so the engine stalls (stops). Check the blade pulley - or it is possible there may be some debris under the deck that is preventing the blades from turning.
its in the passenger of the engine. if you look on that side of the engine (passenger side) , its gonna be in the middle where the belt is located. its also the one that spin with the alternator.
Fast
Fast Japanese Spin Cycle was created in 1994.
Broken timing chain or belt
Check the tensioner pulley the bearings mak be going bad but only make noise at high rpms, at any rate it sounds like something that is driven by a belt does not want to spin as fast as the engine.
No they spin very very fast