Mohs' scale of hardness is a test created by mineralogist Friedrich Mohs, which determines the relative hardness of minerals, on a hypothetical scale of 1-10, where 1 is very soft (eg Talc) and 10 is extremely hard (eg Diamond).
Moh's scale is a scale of relative hardness of material and minerals. The scale goes from 1 to 10, 1 being the easiest to scratch and 10 being the hardest ( Talc-1; Diamond-10)
the numbers on the Richter scale are between 1-10. 1 being minor and unfelt 10 being severe and causing mass destruction So far no earthquake has measured 10 on the Richter scale. YET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Mohs scale is used to measure the hardness of a mineral by its resistance to scratching. From softest to hardest, for example, the ten minerals of the Mohs scale are talc (measuring 1 on the scale), gypsum, calcite, fluorite, apatite, orthoclase, quartz, topaz, corundum, and diamond (measuring 10 on the scale). A sapphire is a 9.0.
It's called the Mohs scale of mineral hardness.
on a scale of 1 to 10 it's a 23
Mica is a very soft mineral, about a 1 or 2
Extremely hard....Diamond rates a 10 on the Moh's scale of hardness...on a scale of 1 (softest) to 10 (hardest). Diamond is the hardest known naturally occurring substance on the planet. And the dimond is so hard on the scale it can cut through glass, amazing!.
Mohs' scale of hardness is a test created by mineralogist Friedrich Mohs, which determines the relative hardness of minerals, on a hypothetical scale of 1-10, where 1 is very soft (eg Talc) and 10 is extremely hard (eg Diamond).
No, ferrous metals are those containing iron. They are also the only metals that respond to magnetism, due to the iron.
On a scale of 1 to 10, I'd say is an 8.
on a scale of 1 to 10 the zinc is a good but not great scooter and the answer is........
Moh's scale is a scale of relative hardness of material and minerals. The scale goes from 1 to 10, 1 being the easiest to scratch and 10 being the hardest ( Talc-1; Diamond-10)
If you are drawing something say in a 1/10 scale or a 1:10 scale, this will make the lines in your picture or map 10 times smaller than in real life
First you need to know the "scale" size, example 1/4, 1/5, 1/8, 1/10, 1/12 etc. For example a 1/4 scale car going 25mph in real life is going 100 scale mph. So 225 mph scale speed if it were a 1/10 model you would divide by 10 and get 22.5 real mph. If you know the true speed and scale you multiply by that number. Example 1/10 scale going 22.5 real mph x 10 = 225 mph scale speed.
On a scale from 1-10 id say Hard core 10 he is really hot like Justin Bieber :D
on the scale of 1-10 Adam wadkin cannot be classified as he is off the chart.