0
What else can I help you with?
Can I add wireless connectivity to my wired network without a network switch or hub?
You can added wirless connectivity by using a wirles router to tranmitt your signal.
What is a purpose of a hub in network?
the hub is used to add a 2 or 3 systems in single network
Getting a Network Hub and Switch to work right?
Getting a network hub and switch to work right for your home office or business can add hours of confusion and labor to your efforts in Internet marketing. If you have lots of computers that are each doing different jobs to improve the performance of certain marketing efforts, then it can be sad when one or more of the computers goes out because of the network hub and switch having problems. You may need to restart or get a wireless router that is easier to use than a wired hub. Sometimes, you have to restart the switch itself. These are just the facts of the business. You either get a good network hub, or you spend hours messing with it.
If you add a fifth PC to your network how do you connect it to a Four port Network hub?
You must daisy chain another network hub onto one of the 4 ports.
How do I add more computers if my Network Hub is out of connectors?
You can always daisy-chain hubs by attaching themselves to each other.
What is the purpose of a home network patch panel and how can it help in organizing and managing the connections within your home network?
A home network patch panel serves as a central hub for organizing and managing the connections in your home network. It helps in neatly arranging and labeling cables, making it easier to troubleshoot and maintain the network. By connecting all the cables to the patch panel, you can easily switch, add, or remove connections without disrupting the entire network setup.
How much hard disk storage can home and small business users add to their network with a NAS device?
How much hard disk storage can home and small business users add to their network with a NAS device? Some home and small business users opt to add up to 6 TB or more of hard disk storage space to their network.
Adding a Hub or a Switch to Your Home Network?
Home computer networking can be sort of a pain to the uninformed computer user. Selecting the right network equipment can be quite a hassle, especially if you don’t know what you’re looking for. One of the main questions, however, is whether you should add a hub or a switch to your home network. Well, that largely depends on the type of network you’re trying to put together. If your network consists of one computer with an internet connection and maybe a console gaming device, a hub is likely going to be better for you. This is a pretty simple network and won’t take much to set up. The way a hub works, is that it takes the signal being broadcast by a computer and splits it amongst every peripheral plugged into it. This ensures that the data reaches the correct device. When searching for a hub, you’re going to want to look for one that’s in the middle of the road. The high end hubs, which can cost hundreds of dollars, are going to come with a lot of bells and whistles that you won’t need for your home network. The lower-priced hubs, between $15-$30, really aren’t going to work all that well and last that long. If you can find a hub from Belkin or Targus, they offer mid-priced hubs that are great quality and will get you your moneys worth. The hub provides a good system, but it can significantly slow down a network, especially those connected to multiple computers at the same time. If more than one computer is broadcasting data, the network can be extremely bogged down. If this is the case, then you’ll want to add a switch over a hub. The switch works well in this situation, because it saves the MAC address of the broadcasting computer as well as the devices connected to its ports. This way, it can be sure to deliver the right information to the right device. Shopping for a switch is similar to shopping for a hub. However, you’ll probably be better off going with a low-end switch, because they’re all pretty much the same. You can grab a five-port hub from Belkin for around $40, and it will do everything you need. If you’re a very simple home networker, you can probably get by simply with a router, which is sort of a combination of the above two devices. It’s a great way to share an internet connection, especially amongst smaller home networks.
What is hub router switches gateway bridges repeaters?
These are all devices called network connectivity devices. They allow a network to be either extended in range, or to add other clients/devices to the network. They have different functionality depending on what the client connection is used for.
Does hub have a default gateway?
A hub doesn't function as a gateway, the easiest way to get a gateway is to use something like a Linksys or Netgear router, they will function as the gateway as well as add another layer of security between your network and the outside world.
What would you use a 2 port Ethernet switch for?
An individual can use a 2 port ethernet switch (or one with more than two) if he or she wants to add a network connection without having to add another cable drop.
How do you network three computers without a hub?
One Answer:It is possible to connect two computers without using a hub by using a switch instead. A switch is better than a hub because it creates a collision domain (CD) and stops them from happening when two devices try and send frames at the same time. Rather than buying a cross-over cable to connect two computers together, you can use two straight-through cables (your average, everyday network cable) and connect them to a switch. This also allows for growth where you can add more computers to the switch if the network grows.Another Answer:With Ethernet, you can use a crossover cable to connect two computers without using a hub, switch, or existing network. Crossover cables are Ethernet cables that have the send and receive wires (pins) switched along the length of the cable. The pins that send information from one computer are connected to the pins that receive information for the second computer. You can use a regular cable if they are modern computers.
