0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How hot does a torch burn at?
With the correct mixture of Acetylene and Oxygen the flame can reach 5,000F or more. Other fuels (Propane etc.) do not create temperatures this high.
What is the antonym for torch?
mrs.saenz here the antonym of torch is darkness
Where to get the torch from time tangled island?
To get the torch from time tangled island you must go to the viking and blast open the cave and you will receive a torch you must make to the vase before the torch goes out.
What is the meaning of 6g position in welding?
The meaning of 6G position in Welding is mean that the pipe or test piece inclined to 45 degree and not rotated during welding process .
When welding in a vertical position the arc length is longer then welding in a flat position?
Actually I usually crowd the puddle when welding vertical up. The longer the arc length the more the arc can wander.
Why welders use welding torch not the flame of firewood in welding?
Welding involves melting metal. Wood flames don't get hot enough.
In ultrasonic welding what creates the heat required for welding?
What creates the heat is the flame inside the torch
What is acetylene welding?
Acetylene welding is a process in which like metals are joined by heating them to their melting temperature with an oxy-acetylene flame produced by a torch.
What is the function of the needle valves on a welding torch?
To adjust gas flow therefore adjusting flame intensity.
Explain oxy- acetylene welding process?
Oxygen and acetylene tanks feed into your torch. When opened, the gases will mix in a chamber in the torch, then flow out of the torch tip. Using a spark lighter, they will ignite causing a flame. This flame can be adjusted to a neutral flame by moving the knobs on the tank regulators.
How is oxygen used used in welding?
Oxygen is used to produce hot flame which is used in welding purpose
Why welders use welding torch instead of flame of firewood?
An oxy-acetylene welding torch is used for welding rather than a flame from firewood because it is possible to concentrate the energy and heat at one small precise location, to move it readily, to generate a lot of heat in one small area, to control the amount of heat precisely, and to control the amount of oxygen in the flame and therefore the oxidation occurring at the weld.
What are facts about welding?
# If you look into the flame you'll go blind, # if you touch the flame it will burn you, # your face is always hotter than your buttocks, # a cigarette always tastes better when lit by a torch flame, # always weld with a full gas tank, # you can get a tan/sunburn from welding, and # welding is fun when you weld random items together.
Who invented the welding torch?
John T. Herrera: The Welding Torch Inventor
Which gas burns the hottest when cutting torch is used?
oxygen supports the combustion of the gas that one uses in the welding/cutting torch. Acetylene combined with Oxygen produces the hottest flame.
What tool mixes gas and air to produce a hot flame?
oxy-acetylene torch
Can you use LPG for ARC welding?
ARC welding uses large amounts of electricity to melt the metal, not a hot flame. So no, LPG cannot be used for ARC welding.
