0
when an alternating current apply on primary side of transformer then magnetic flux produced in the iron core of transformer.Then flux link with secondary winding of transformer so that an emf produced in a transformer.
Wiki User
∙ 14y ago
Wiki User
∙ 11y agodue to self induction.that is when current flow through a conductor an magnectic field produce around that conductor by self induction.
Add your answer:
Earn +20 pts
An isolation transformer has 500 turns on the primary winding how many turns are on the secondary?
An isolation transformer is intended to isolate the ground path in the primary from the secondary while maintaining the same voltage on the secondary. This means a turns ratio of 1 to 1. If there are 500 turns on the primary, then there will be 500 turns on the secondary.
What are the applications of equivalent circuit of a single phase transformer?
Equivalent circuits allow you to treat the transformer itself as being 'ideal', while treating its losses, etc., as external elements to which the normal laws of networks apply.
What are step-up and step-down transformers?
A Step Up Transformer is one whose secondary voltage is greater than its primary voltage. This kind of transformer "steps up" the voltage applied to it.The Step Up transformer is designed to increase the voltage from the primary winding to the secondary winding.A Step-Down transformer is one whose secondary voltage is less than its primary voltage. The step down transformer is designed to reduce the voltage from the primary winding to the secondary winding. This kind of transformer "steps down" the voltage applied to it.The basic equation for stepping up or stepping down the voltageNp/Ns is known as the turns ratio.The induced voltage in the secondary winding (Vs) is in proportion to the primary voltage (Vp) and is given by the ratio of the number of turns in the secondary (Ns) to the number of turns in the primary (Np).I to answer basic transformer questions.
How you differentiate between single phase and three phase transformer?
A single-phase transformer works with a single-phase supply, while a 3-phase transformer is used with a 3-phase supply. A single-phase transformer has 2 wires on the primary and secondary (ignoring taps) while a 3-phase tansformer has 3 or 4 wires on the primary and secondary.
Does a step-up transformer have a higher primary or secondary resistance?
It is a step up transformer since the secondary windings are greater than the primary. the turns ratio is (primary to secondary) 1:5, so the primary voltages is 1/5 of the secondary (5 volts).
The primary winding in a transformer is connected to the what?
The primary winding of a transformer is connected to the supply, while the secondary winding is connected to the load.
What is the term for the transformer winding to which the load is connected?
The load is connected to the transformer's secondarywinding, while the primary winding is connected to the supply. The terms, 'primary' and 'secondary', do NOT relate to voltage levels.
What is the difference between a secondary and primary coil?
The primary coil is the one with voltage applied, or the 'input'. The secondary coil is the one in which a voltage is induced by electromagnetism, or the 'output'. In a step up transformer, the secondary coil voltage is higher than the primary. In a step down transformer, the secondary coil voltage is lower than the primary. In an isolation transformer, the secondary coil voltage is the same as the primary. Here, the point of the transformer isn't to raise or lower voltage, but to keep a particular circuit electrically disconnected from another circuit, while still allowing the circuits to function together (through electromagnetism).
What are the primary winding and secondary winding of a transformer?
The primary winding is the winding connected to the supply, while the secondary winding is the winding connected to the load. The terms, 'primary' and 'secondary' are unrelated to voltage levels.
How voltage is measured in potential transformer?
By connecting a voltmeter across the secondary terminals of the voltage/potential transformer. The transformer acts to reduce the voltage applied to its primary winding, while electrically-isolating the primary (usually high-voltage) circuit from the voltmeter.
What is stepup transformer?
A step-up transformer produces a voltage across its secondary winding which is higher than its primary winding. The secondary winding is connected to the load, while the primary winding is connected to the supply.
Is there more current in the primary or secondary winding of a transformer?
The terms, 'primary' and 'secondary', describe how a transformer is connected and his nothing to do with which is the lower- and higher-voltage winding.The primary winding is the winding connected to the supply, while the secondary winding is the winding connected to the load. So, for astep-up transformer, the secondary winding is the higher voltage winding, whereas for a step-down transformer, the secondary winding is the lower voltage winding.For a loaded transformer, i.e. a transformer whose secondary is supplying a load, the higher-voltage winding carries the smaller current, while the lower-voltage winding carries the higher current.
An isolation transformer has 500 turns on the primary winding how many turns are on the secondary?
An isolation transformer is intended to isolate the ground path in the primary from the secondary while maintaining the same voltage on the secondary. This means a turns ratio of 1 to 1. If there are 500 turns on the primary, then there will be 500 turns on the secondary.
What is winding transformer?
A winding is the name given each of the coils wound around the transformer's core. A basic transformer has two windings, termed the primary winding (connected to the supply) and the secondary winding (connected to the load).
How can you identify which one is step up or step down transformer?
A transformer has two windings, termed the 'primary winding' and the 'secondary winding'. The primary winding is the winding connected to the supply, while the secondary winding is connected to the load. The secondary voltage of a 'step up' transformer is higher than the primary voltage; the secondary voltage of a 'step down' transformer is lower than the primary voltage. The simplest way to determine whether a transformer is a step up or step down, is to measure the primary and secondary voltages. If you are simply looking at a transformer, then the transformer's insulated bushings will give you a clue -the higher voltage bushings are much bigger than the lower voltage bushings. If you have access to the inside of the transformer, then the higher voltage windings are thinner and have a greater number of turns than the lower-voltage winding.
What are the applications of equivalent circuit of a single phase transformer?
Equivalent circuits allow you to treat the transformer itself as being 'ideal', while treating its losses, etc., as external elements to which the normal laws of networks apply.
How do you compute for the size of wire in primary side of transformer 34.5kv?
There is insufficient information in the question to properly answer it. While you specified the primary voltage, 34.5 Kv, you did not specify the current or the KVa. Please restate the question.
