Parallel with the cooling contacts
An anticipator is a device in a thermostat which determines when to turn on or shut off the heating or cooling mechanism.
Mercury Bulb, heat-anticipator and a cold-anticipator.
Yes. Most cooling fans are controlled by a relay because they take too much current to be wired directly.
A cold anticipator
check the thermostat that runs the fan.
A "hard start kit" is a start capacitor, wired in with the compressor motor, to help it start on a call for cooling.
The cast of Anticipation - 2012 includes: Will Deperi as Anticipator
The cooling fan generally does not run when the car is cold, but could be wired directly to the battery so that when the ignition is engaged, the fan comes on. This is not a factory modification but is often accomplished if the car tends to run hot.
a fan bypass is done by bypassing the cooling fan switch and running the fan power to a key on circuit which means the fan runs all the time the car is running it will not cycle on and off. its usually wired to an acc fuse in box or done correctly it should be wired with a relay because of the hi amp constant draw
Sounds like the thermal relay is defective.
The noun form for the verb to anticipate is anticipator, one who anticipates. Anticipation is another noun form.