Cubic board feet is not a term used in the lumber industry, but it's obvious that a cubic foot is a cube that is one foot on an edge. A board foot, which is a common term used in the lumber industry is a piece of wood that is twelve inches wide, one inch thick and one foot long. Ten board feet would be a board one inch thick, twelve inches wide and ten feet long. (And no, a board doesn't have to be 12 inches wide. If it's 6 inches wide and 2 inches thick and one foot long, there is still one board foot of material there.) To make a cubic foot of wood, one might take one board foot of wood (12"x12"x1") and put it down, then stack another eleven pieces just like it on top the first one. That's 12 pieces of wood that are 1" thick for a total of 12" in height, and which are 12"x12" (length and width) giving us a volume of wood that is 12"x12"x12" or one cubic foot.
Wouldn't converting .404 nm to meters be equal to (0.404)/(10^9) = 4.04 x 10^-10 m? Then that cubed would equal: 6.59 x 10^-29. Am I calculating something wrong? ----- When I did this problem, the diagonal of the body-centered cubic ended up being 0.572 nm. Then, with the pythagorean theorem, the edge was .404 nm. When converted to meters, it is 0.003710. This cubed (for volume) is then 5.1 x 10 (to the negative 8 power). <-- answer to question
200,000,000 (about). it has a ton of them
Depends on the weight. Check the MythBusters website, they did an experiment on this.
round about 5560 just a guess but that is what i guess.
It all depends on the wood. Some wood is denser and heavier than others.
Linear meters (Length) can not be converted to cubic meters (Volume)
cubic feet x 12 = board feet
There are no linear feet in a cubic yard as they are different units of measurement. A linear foot measures length, while a cubic yard measures volume.
To convert lineal meters to cubic meters for timber, you would need to know the width and height of the timber in meters. The formula is: Cubic meters = Lineal meters * width * height. Multiply the lineal meters by the width and height to calculate the volume in cubic meters.
Linear units, like inches, can't be converted to cubic units. If they could, then you'd be able to calculate your height in gallons.
No way to tell. Cubic feet is a measure of volume. Linear feet is a measurement of distance or length. They can not be converted with the information you have given.
lineal (or linear) metre, this refers to length or distance. this avoids confusion of square metres or cubic metres. there is no need to use this term in normal circumstances. timber can be sold by the cubic metre for fire wood, square metre for flooring or linear metre for framing
To convert board feet to lineal feet, divide the total board feet by the board's thickness in feet. For example, if you have 100 board feet of lumber that is 1 inch thick, you would divide 100 by 1, which equals 100 lineal feet.
Linear footage is a one dimensional measurment. Board footage is volume. one board foot is 1 inch thick by 12 inches square. 1" x 12" x 12" = 144 cubic inches of wood or one board foot.
The same as a meter. It is called "linear" to distinguish it from square or cubic meter, but the "linear" can really be omitted.The same as a meter. It is called "linear" to distinguish it from square or cubic meter, but the "linear" can really be omitted.The same as a meter. It is called "linear" to distinguish it from square or cubic meter, but the "linear" can really be omitted.The same as a meter. It is called "linear" to distinguish it from square or cubic meter, but the "linear" can really be omitted.
It depends on the density of the timber.
The answer depends on the cross-sectional area of the timber.