by shoving chicken up your butt
Viscosity is the term.
viscosity is inversely proportional to the flow rate. the actual formula is complex , but higher the viscosity slower will be the flow rate. honey flows slowly and air flows freely because of the above reason.viscosity is also essential,otherwise we would have never been able to use an ink pen.viscosity makes the ink to flow on paper
water flow rate is important, because geysers and new designer mixers depend on adequate pressure. proper water flow rate should be 2 meters per second
16LPM
NM3:NM3 stands for Normal meter cube and especially this unit is used gas/vapour application. NM3 is a constant value under the Varying Pressure and Temperature.NM3 is calculated if the Density and Mass of the gas/vapour is known.For Eg : In a pipeline, If Air is flowing at the rate of 1000M3/hr at the Pressure of 5Barg and at the temperature of 30degC, then Density of Air can be arrived from the corresponding pressure and temp which is 6.9Kg/m3. Then Mass flow rate of Air will be obtained by multiplying the arrived density with the Volumetric Flow rate i.e Rho X V = 6.9X1000=6900Kgs/Hr.Normal Flow rate of Air = Mass Flow rate / (Mol.wt of Air / 22.4) = 5349 Nm3/HrM3:M3 stands for Metre cube and this unit is used in Solid, Liquid and gas application. Meter cube is used to quantify the matter in Volume.In the above mentioned example, Flow rate of Air is mentioned as 1000M3/hr which is the Volumetric Unit.
by shoving chicken up your butt
it can be used in construction for example building foundations and driveways or in food for example making candy,ice cream and baked goods.
the ratio of the distillate mass flow rate to the mass flow rate of the steam used
Flow meters are used to measure the linear, nonlinear, mass, or volumetric flow rate of a liquid or gas.
It is used to measure the rate of flow of liquid & glasses
notch is the device used for the measurement of the rate of flow of liquids through small channels at tanks where as orifice is used to measure rate of flow through pipes
the velocity of water flow within a drainage pipe; the equation is V=L/t L= Length t=time. Then the flow rate; Fr=A*V, Where A= sectional area and V = velocity.
flow rate of water
A Flow Transducer is also known as a flow senser. A flow senser is used to sense the flow rate a fluid flows or flow logger to record the flow of the fluids that run through them.
Flow control is used in data communications. Flow control is a process that manages the rate at which data is transmitted to ensure that it is properly received.
Many different devices for measuring liquid flow rate are listed in the Flow Measurement article at Wikipedia.
watt