the velocity of water flow within a drainage pipe; the equation is V=L/t L= Length t=time.
Then the flow rate; Fr=A*V, Where A= sectional area and V = velocity.
You cannot use Bernoulli's equation because the rocks would create a turbulent flow and you need a steady flow to use Bernoulli's equation. It could (in theory) but you would need accurate measurements of size shape and placement of each of the rocks involved. It would be a nightmare just to accumulate the data.
The equation assumes steady state or laminar flow and hence cannot be used for turbulent flows.
300mm is a very low head, you can't expect much flow through that pipe, but you can work it out from the mechanical energy balance equation.
Coz poiseuille eq is for poiseuille flow, which is a laminar flow, not turbulent flow. And it also need to be a fully developed , pressure driven flow.
Thet resistor opposes the flow of current through it becoz of its internal construction. Its material has opposing property.
is the equation for flow velocity
Flat roof construction has many disadvantages. However the main disadvantage is that there is nowhere for rainfall water to flow. It will settle on the roof causing dampness.
You cannot use Bernoulli's equation because the rocks would create a turbulent flow and you need a steady flow to use Bernoulli's equation. It could (in theory) but you would need accurate measurements of size shape and placement of each of the rocks involved. It would be a nightmare just to accumulate the data.
Depending on the construction of the reservoir, yes it can leak. Especially if shaped explosives are used at key flow points in the structure.
The equation assumes steady state or laminar flow and hence cannot be used for turbulent flows.
They specify heat flow for the reaction.
PDEs are used in simulation of real life models like heat flow equation is used for the analysis of temperature distribution in a body, the wave equation for the motion of a waveforms, the flow equation for the fluid flow and Laplace’s equation for an electrostatic potential.
Poiseuille Equation can only be applied to laminar flow.
fluid flow.
uc= Rn/pD
The reinforced concrete construction is the construction joint in water retaining structure.
300mm is a very low head, you can't expect much flow through that pipe, but you can work it out from the mechanical energy balance equation.