Want this question answered?
reverse and set the parking brake.
Trouble code P0730 means:Incorrect gear ratio
straight cut gear teeth on the reverse gear set. Classic Honda Characteristic.Use Honda MTF manual trans fliud and enjoy
Say 50 teeth divided by 5. That is a ten to one ratio.
Remove the cover plate and you will find the numbers stamped on the ring gear side which are two set of numbers divided within a dash, divide the smaller into the larger to come up with the ratio.
There's no set length for all 16" bikes. It depends on the proportions of the frame and the gear ratio it's set up with.
The gear train consists of an alular gear ring on shaft, connected to the other by "sun" and "planet" gears within the annulus. Gear changing is achieved by having one set per ratio, controlled by brakes on the annuli to bring the desired set into use. The term 'epicyclic' refers to the geometry of the gear-box.
The Classic was the FLD132, and no. For one, the speedometer is set according to the gear ratio, tire size, and rear end gear ratio of the truck, and if those vary, the speed won't be accurate.
You probably have a broken Sun Gear from hammering into reverse. Its a cage thing that only works the reverse gear. It holds a set of clutch's. You have to pull the entire transmission to fix. Its almost the last thing before the output shaft. Around a $50 part.
If the pieces came from a solid object of uniform density then the ratio is the same for each piece. But if not, the ratios need to be calculated separately.
The average is the ratio between the sum of these values and the number of values.
Only ROBLOX can sell gear, and set a price, sorry.