0
The resistance value for linear resistance is changed by changing the wavelength of the current or by installing additional resistors in the circuit. This restricts the amount of electricity which flows through the wiring.
The resistance value for the linear resistance can be changed through strain over time. It can also be changed by changes in temperatures, such as going from hot to cold.
What else can I help you with?
How the resistance value for the linear resistance can be changed?
Resistance can be changed by strain over time and changes in the temperature. Resistance thermometers are sensors that are used to measure temperature by correlating the resistance of the RTD elements.
What a few example of non linear resistance?
Two examples of non linear resistance is a diode and a light bulb.
Does voltage versus current indicate a linear relationship?
Yes, provided the resistance is constant. If the resistance varies with current, then you have a non-linear circuit
What happens to the current as the resistor approches infinty?
Most resistors are linear, or 'ohmic', devices -which means that they obey Ohm's Law. So the ratio of voltage to current remains constant for variations in voltage. In other words, their resistance remains constant -providing their power rating isn't exceeded. So you can say that, providing the current increase doesn't cause their power rating to be exceeded, their resistance should remain the same. Resistors wouldn't be of much use if their resistance value changed whenever the current through them changed!
Is resistance a linear device?
YES it is linear. It is a passive device classified as linear however as frequency increases its behavior will change.
How do we calculate the cold resistance of the bulb?
The cold resistance of a bulb can be approximated by measuring the resistance of the filament with a multimeter when the bulb is turned off and at room temperature. The resistance measured in this state can give an estimation of the cold resistance of the bulb. Keep in mind that this value may not be exact due to factors like the temperature coefficient of resistance and the non-linear behavior of the filament's resistance.
Can the internal resistance be negative?
No, internal resistance cannot be negative. In electrical systems, internal resistance represents the opposition to the flow of current within a device, such as a battery or capacitor, and is always a positive value. Negative resistance is a concept that can occur in certain non-linear devices, but it is not applicable to traditional internal resistance in passive components.
What is a difference between DC and ac resistance and expline DC resistasce?
DC is just direct current into a resistance it is a linear function. AC if the resistance is non reactive it would be the same linear function.
What is linear average?
Linear Average is the initial value plus the final value divided by two.
What relationship does a linear graph shows?
A linear graph shows a linear equation in which the value of one variable depends on the value of the other variable.
Is a voltmeter a linear scale?
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.
What can be used to convert decibels?
To convert decibels to a linear scale, you can use the formula: linear value = 10^(decibels / 10). Conversely, to convert a linear value to decibels, you can use the formula: decibels = 10 * log10(linear value).
