0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What torch do you use in welding to produce a variety of flame sizes?
A welding torch as opposed to a cutting torch is more appropriate . Welding torches accommodate a variety of tip sizes designated by a number and have only one orifice (hole) for the flame. The smaller the number the smaller the tip orifice (hole) and a smaller flame. Larger numbers means larger hole sizes and larger flames. Sizes start at 0 and can be as large as 40 or more. The size of the tip is determined by the thickness of material to be welded/brazed. Thin materials would call for a small tip size, thick materials would need a larger tip size.
What is a vertical stick?
Welding tip
What is the name of a welding torch tip that has two ends?
Mig tip
What does 7016 stand for on a welding rod?
for steel structure building can i use: -size 2.5mm of 7016 welding rod as a filler for welding IPE240 to plates -size 2.5mm of 7016 welding rod as 2nd pass
What is Arc length in welding?
Arc length is the distance from the tip of the electrode to the workpiece.
What is the hottest part of a welding flame?
It is just at the end of the blue flame that comes from the tip.
What is the effect on welding with wrong size?
no effect
How do you determine sax mouthpiece sizes?
Each manufacturer does it a bit differently. several factors might be indicated by the "size." Tip opening - the space between the tip of the reed and the mouthpiece - is almost always indicated, usually with a number. The bigger the number the bigger the opening. 5, 6, and 7 are usually the mid-range with lower numbers indicating a more closed mouthpiece (including student pieces). Larger numbers are for big ol' things that play loud and take lots of air and lots of strength. Facing length may be indicated, usually by letters Chamber shape and size may also be indicated by letter, but often that is indicated by a model name Baffle style may also be indicated but that's usually by the model name, too.
Whether HAZ is higher in gas welding or arc welding?
Larger in Gas Welding. In all arc processes the HAZ is concentrated in a couple inches around your bead. In gas welding it can be double or triple that size.
What is thickness of 6013 welding rod?
I believe you are confused. The number reading on the top of the welding electrode is simply an indication of the characteristics of that welding rod. Ex. 6013 means 60 thousands pounds of tensile strength per square inch,1 indicates that is an all position rod, and 3 is the mineral compound of the rod. Hints 6013. The welding rod size is indicated in fractions of an inch. Ex. 1/16, 5/64, 3/32, 1/8, 5/32 etc... Hope this has been helpful to you. Refer to the American Welding Society for further information.
What is arc diameter in welding?
Depend upon dia of electrode & Arc length between Electrode tip and job surface.
How is the root opening size determined in welding?
the root opening is the distance between joint members at the root of the weld before welding. the root opening must be accurate so that excess welding is not necessary.
