There is a "U" shaped clip on the handle. That is all that holds it on.
should be an Allen head or torx screw in the center of the crank.
Push in slightly on the door panel around the window crank area. Take a small hook shaped tool (can be made from a coat hanger) and pull out the C shaped clip that pins the handle to the shaft. Pull handle off shaft.
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
The interchangeable part for a 1994 Mustang window crank handle would be a 1991 to 1993 Mustang window crank handle. This part can also be found at some salvage yards for automobile parts.
They sell a window crank removal tool to open the cotter in and slide off the winow crank handle. Slide the tool under the window handle and push the cotter pin back, off comes the handle
There is a special tool for the removal of the window crank handle. This item costs less then $5.00, you can search for it online.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.
You can remove the window crank handle by just using a simple shop rag. How you do this you slide the rag(unfolded) between the door panel and window crank and rotate around the window crank until you snag the clip that is retain the window crank. The clip is a simple wire clip shaped like a "C" To reinstall you place the clip back in the groove on window crank and press back on the window regualtor shaft
How to Remove or Install Car Window Crank Handles check related link below
It is held in place by a horseshoe shaped clip. the clip is removed by reaching behind the handle with a small pick and pulling the clip out.