To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
The interchangeable part for a 1994 Mustang window crank handle would be a 1991 to 1993 Mustang window crank handle. This part can also be found at some salvage yards for automobile parts.
They sell a window crank removal tool to open the cotter in and slide off the winow crank handle. Slide the tool under the window handle and push the cotter pin back, off comes the handle
There is a special tool for the removal of the window crank handle. This item costs less then $5.00, you can search for it online.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
You can remove the window crank handle by just using a simple shop rag. How you do this you slide the rag(unfolded) between the door panel and window crank and rotate around the window crank until you snag the clip that is retain the window crank. The clip is a simple wire clip shaped like a "C" To reinstall you place the clip back in the groove on window crank and press back on the window regualtor shaft
Your local auto parts store can sell you an inexpensive tool (should be under $10) that will remove the retaining clip that is located behind the crank handle. To install simply replace the retaining clip on the handle and press the handle into postion.
How to Remove or Install Car Window Crank Handles check related link below
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
Make your life easy and just break off the door handle. When you are finished with your project, just replace the door handle with a new one from the dealer.
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
If there is no faster head visible then it likely is attached with a clip on the backside of the crank handle. slip the handle between the handle and door panel to remove the clip.