0
What else can I help you with?
How long should the base set before asphalt paving?
It can sit for as little time as it takes to move the paving equipment into place. What you are looking for is the compaction of the base. As long as it meets the standards given by the architect and engineer, you will be fine.
Is it safe to cover microwave food with shiny paper plate?
It should be, as long as the coating on the plate is not foil.
What coating should the wooden crib have?
A vinyl coat would be fine. As long as there is one so there are no splinters.
What is the difference between painting and coating?
painting is application of color to a surface and can be use for aesthetic use coating is application of to protect the underlaying surface such as FBE coating and meatal coating and powder coating
How long should Roundup be applied before rain?
Roundup should be applied at least 30 minutes before rain to ensure it has time to be absorbed by the plants.
Does intumescent paints require any special type of topcoat?
In exposed and semi-exposed interior environments, the applied intumescent paint should be coated with a compatible finish coat, in order to give the desired colour and seal the coating. The topcoat system must be suitable for the environment in which it is to be used and should be a good quality, long oil alkyd, silicone, acrylic latex or polyurethane type. All topcoats should be applied in accordance with the topcoat manufacturer's recommendations. Ensure that the coating is thoroughly dry before application of top coat. Typically, allow a minimum of 7 days for the intumescent coating to fully cure before application of any top coat system. The intumescent paint manufacturer should be contacted to ensure compatibility of the top coat system.
How long should the non-skid coating be allowed to dry before the repair is subjected to traffic flow?
12 hours
What is galvonization process?
Galvanization is a process where a protective zinc coating is applied to steel or iron to prevent rusting. This is typically done through dipping the metal in molten zinc or applying a zinc-rich paint. The zinc coating acts as a sacrificial anode, corroding before the base metal, providing long-lasting protection.
How many hours would a gardener take to lay 6 paving stones in a lawn?
how long does it take to raise 6 Paving stones that are sinking. What's the cost?
How long should you wait before washing your hair after new color applied?
about 30 to 45 minutes.
Does iron last a long time?
it depends on your quality of coating and the metarial of coating. it can last the rest of your life also it can be rusted in a moment
Garden size is 15m long by 10m wide paving stones are 1m by 1m how many paving stones are needed?
To determine the number of paving stones needed, first calculate the area of the garden: 15m (length) × 10m (width) = 150 square meters. Since each paving stone covers an area of 1m × 1m = 1 square meter, you will need 150 paving stones to cover the entire garden area.
