Half an hour
You change the control arms, upper and lower. The ball joints are manufactured into the control arms.
This question makes no sense (need to know what vehicle) first of all ball joints do not have races neither inner or outer secondly there is generally no upper balljoints at all
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
The ball joints are riveted or pressed into the upper and lower control arms, then the spindle is bolted to the ball joints.
I think you met joints, and the joints are the upper joint and the lower joint. The order of clarinet peices from the top is mouthpiece, barrel, upper joint, lower joint, bell.
What year, if it has upper it has to be pre 1989
The lower ball joints have to be pressed out. The upper ball joints are part of the control arm, so the complete upper assembly has to be replaced.
you dont they dont have grease zerks you have wait until they go out and then replace them with after market parts that have a place to install a zerk
Change lower ball joints on a 96 gmC 4 by 4
which ones? upper or lower?
They are Pressed in. You will need to take it to a shop
There are no upper ball joints - that role is played by the McPherson struts. See "Related Questions" below for more