Under the car on the upper side of the transmission you will find a plug. Remove the plug and stick you finger in the hole. If you feel fluid, then it is full.
You must remove the transmission are engine to replace the rear main seal.
transmission, drivers side behind the left front tire. Have to remove the tire to get to it. It just unscrews from the transmission. You can get a replacement part (Standard p/n LS224 $16.48) from www.RockAuto.com.
The transmission fluid capacity, in your 2000 Chevrolet Cavalier, is 12 quarts. It is recommended to change the transmission fluid every 30,000 miles.
where is the shift solenoid valve (2-3) located on 2000 chev cavalier
Remove transmission oil pan for access
No they do not have the same motor.
The 2000 Chevy Cavalier windshield washer tank is held in place with for retaining bolts. Remove the retaining bolts and the windshield washer tank will come out.
Yes if it is an automatic. Checking fluid level on these are a treat.
Remove the serpentine belt and remove the alternator. The belt tensioner bolts are under the alternator.
The 2000 Chevy Cavalier cooling fan shroud is held in place with 10 retaining bolts. Remove the retaining bolts and the cooling fan shroud will come off.
Remove the transmission oil pan
Remove fuel tank for access
If your looking for the automatic transmission dipstick, it doesn't have one.
You have to remove the pan to drain the fluid.
take it to a shop.
have to remove the transmission oil pan for filter access
about 7 litres
Turbo hydo matic 3 or 4 speed depending on the car
A 2000 Chevy Cavalier does not have a cabin air filter. These standard vehicles came with an engine air filter located under the hood of the vehicle, in the air box.
Yes. I dont know how but all 2000 Chevy Cavaliers were made in a way (i dont know which way) making the transmission easy to crack. You do need to remove the transmission and fix or replace it. Most Dealers will give you a discount for a fix if you complain the right way
Carefully. I have a99 cavalier and I had to remove everything up to the firewall to put in my aftermarket stereo. It is a project that will take a number of hours and will definalely help if you have the right tools!
Remove the plug from the bottom of your 2000 Chevy transmission. Allow the transmission to completely drained out. Return the transmission plug to its original position. Fill the transmission with new fluid.