A standard air compressor hose is on average about 25 to 50 feet in length. These hoses are typically 1/4 of an inch in width but sometimes 1/2 inch too.
There is not a hose under the 2001 Chevrolet blazer air-conditioner compressor. The compressor hose is on the top of the compressor.
The high pressure hose is between the compressor and orfice tube
its a hand held rachet that's hooked to an air compressor by a hose and it operates on compressed air from the air compressor.
The 2001 Dodge Dakota air conditioning drain hose is located on the bottom of the air conditioning compressor. The drain hose leads from the compressor to the bottom of the engine compartment.
if your uing air tools on the compressor then you will put one or two drops directly into the inlet where you connect the compressor hose
Larger hose from the compressor
The larger hose will also have a greater volume and be able to supply a greater volume of air to the tool you are trying to run. A brad nailer doesn't need much air volume (cfm) but a framing nailer or air sander do. Also, larger hose has less pressure drop over a long distance.
On a 2001 Ford Expedition, the air compressor hose is typically located near the front of the engine, connected to the air conditioning compressor, which is mounted on the engine block. You can find the hose running from the compressor to the condenser or evaporator, depending on the specific routing of the AC system. It's advisable to consult the vehicle's service manual for precise details, as the configuration may vary slightly based on the engine type.
The Cadillac Escalade evaporator drain hose can be found on the bottom of the air conditioner compressor. The drain hose extends from the compressor to the bottom of the engine compartment.
Low pressure hose - larger hose from the A/C compressor
Larger hose from the air compressor
The 2004 Toyota Tacoma air conditioning drain hose begins at the bottom of the air conditioner compressor. The drain hose will go to the bottom of the engine compartment.