0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are some features of NAS servers?
NAS or Network-attached servers are servers that are connected to a network and given an independent IP address. This helps to speed up processing and adds additional storage space that does not load down the network. Some NAS servers can also be accessed remotely. Although some may run on the same operating systems as the computer and network it is connected to, many have their own OS that is compatible.
What is the role of dhcp?
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. RFCs 2131 and 2132 define DHCP as an Internet Engineering Task Force (IETF) standard based on Bootstrap Protocol (BOOTP), a protocol with which DHCP shares many implementation details. DHCP allows hosts to obtain necessary TCP/IP configuration information from a DHCP server.If you want to more further detail so you can visit this website:http://www.iyogibusiness.com
How many number of servers does a peer to peer network have?
2
What is scope and super scope?
A DHCP scope is a valid range of IP addresses which are available for assignments or lease to client computers on a particular subnet. In a DHCP server, you configure a scope to determine the address pool of IPs which the server can provide to DHCP clients. Scopes determine which IP addresses are provided to the clients. Scopes should be defined and activated before DHCP clients use the DHCP server for its dynamic IP configuration. You can configure as many scopes on a DHCP server as is required in your network environment Using superscopes A superscope is an administrative feature of DHCP servers running Windows Server 2003 that you can create and manage through the DHCP console. Using a superscope, you can group multiple scopes as a single administrative entity. With this feature, a DHCP server can:Support DHCP clients on a single physical network segment (such as a single Ethernet LAN segment) where multiple logical IP networks are used. When more than one logical IP network is used on each physical subnet or network, such configurations are often called multinets.Support remote DHCP clients located on the far side of DHCP and BOOTP relay agents (where the network on the far side of the relay agent uses multinets).In multinet configurations, you can use DHCP superscopes to group and activate individual scope ranges of IP addresses used on your network. In this way, the DHCP server computer can activate and provide leases from more than one scope to clients on a single physical network. Superscopes can resolve certain types of DHCP deployment issues for multinets, including situations in which: The available address pool for a currently active scope is nearly depleted, and more computers need to be added to the network. The original scope includes the full addressable range for a single IP network of a specified address class. You need to use another IP network range of addresses to extend the address space for the same physical network segment.Clients must be migrated over time to a new scope (such as to renumber the current IP network from an address range used in an existing active scope to a new scope that contains another IP network range of addresses).You want to use two DHCP servers on the same physical network segment to manage separate logical IP networks.Superscope configurations for multinets The following section shows how a simple DHCP network consisting originally of one physical network segment and one DHCP server, can be extended to use superscopes for support of multinet configurations. Example 1: Non-routed DHCP server (before superscope) In this preliminary instance, a small local area network (LAN) with one DHCP server supports a single physical subnet, Subnet A. The DHCP server in this configuration is limited to leasing addresses to clients on this same physical subnet. The following illustration shows this example network in its original state. At this point, no superscopes have been added and a single scope, Scope 1, is used to service all DHCP clients on Subnet A. Example 2: Superscope for non-routed DHCP server supporting local multinets To include multinets implemented for client computers on Subnet A, the same network segment where the DHCP server is located, you can configure a superscope which includes as members: the original scope (Scope 1) and additional scopes for the logical multinets for which you need to add support (Scope 2, Scope 3). This illustration shows the scope and superscope configuration to support the multinets on the same physical network (Subnet A) as the DHCP server. Example 3: Superscope for routed DHCP server with relay agent supporting remote multinets To include multinets implemented for client computers on Subnet B, the remote network segment located across a router from the DHCP server on Subnet A, you can configure a superscope which includes as members: the additional scopes for the logical multinets for which you need to add remote support (Scope 2, Scope 3). Note that since the multinets are for the remote network (Subnet B), the original scope (Scope 1) does not need to be part of the added superscope. This illustration shows the scope and superscope configuration to support the multinets on the remote physical network (Subnet B) away from the DHCP server.
What is a network tree?
its a combination of the star network connected in many at a time...
Why can't the term workstation be applied to ordinary personal computers that are connected to a network?
The term workstation is generally reserved for computers that are designated to have many people use them, or a computer used as an access point to a group of servers.
How many web servers are there on a network?
Websites only need one server to function, however many have redundant servers or extra servers that handle certain aspects of the site. Most websites are hosted from server farms where there are hundreds of servers in operation.
How many IP addresses does a remote access server lease from a DHCP server at one time?
Usually only one. A DHCP server is a Dynamic Host Control Panel, which assigns an IP to a network device. It will only give you one, and everyone using that network device will also have the same IP.
Types of application servers?
Most servers have what's called a RAID-5 array. Some examples of servers are network servers which allow many computers to use the same network, game servers which are used by game companies and allow thousands of people to play their game at the same time, and telecom servers which control your phone service and possibly your cable service.
Software in that can access mail server in a network?
Many home servers also run e-mail servers that handle e-mail, like windows seven.
How many servers connects at a time in unix?
The question is too vague to answer with any certainty. Are you asking about individual connections, multiple network connections, total number of servers?
How many computers can be connected on various network topologies?
I found and linked below a website that has information on many, but not all, network topologies.
