2
That depends very much on what you want to configure with it. Many aspects, such as MAC address and IP address, can be configured with the ifconfig command.
4 gb
10 bytes - 4 for the network, 6 for the MAC address.
When it is new it will initially be configured. When a new operating system is installed, it will be configured. Installing some software or changing some settings may require a little re-configuring. If you are chaning the country settings, for example. If the computer is being connected to a network it may need to be configured. If it is being upgraded it may be configured. If it is having a complete change in usage, maybe as a server instead of a client it may be configured. So there are many reasons when a computer would be configured.
A network card is used for this purpose. Many times, you will see the abbreviation NIC used. NIC stands for Network Interface Card. There are many types of NICs that have been used in the past. For all intents and purposes, the only NIC type in use today is Ethernet cards.
The loopback address for each machine is 127.0.0.1, regardless of how many machines are on the network.
If your router assigns IP addresses via DHCP, it is better to configure the router to pre-assign IP addresses to certain hostnames.If you do not have a DHCP server running in your router, you can specify an IP address for a network interface with the ifconfig command. For example:ifconfig eth0 192.168.20.10
In computer networking, a node refers to a connection point. It has two types of addresses, a network address and a physical address.
Interfaces come in three types: Networks Peripherials People These are generally called LAN's (Local area network) Interfaces or sometimes NIC's Network "Interface" Cards. System I/O ports, like Rs-232 serial "interfaces" or USB and Firewire. people "interface" with a computer via the mouse, keyboard and the GUI or the Graphical User "interface" i.e. Windows. E
Internet protocol (IP) describes a network address. Part of the address is for the network, and other part is for the client in that network. If you wish to know more, there are many excellent answers to questions on TCP/IP on this site; just search for the questions.
There can be many, many reasons for that. Cables might be disconnected or have an intermittent connection; the central hub or switch may be turned off or have a problem; the network card may be damaged; IP addresses may be configured wrong; and may others more.There can be many, many reasons for that. Cables might be disconnected or have an intermittent connection; the central hub or switch may be turned off or have a problem; the network card may be damaged; IP addresses may be configured wrong; and may others more.There can be many, many reasons for that. Cables might be disconnected or have an intermittent connection; the central hub or switch may be turned off or have a problem; the network card may be damaged; IP addresses may be configured wrong; and may others more.There can be many, many reasons for that. Cables might be disconnected or have an intermittent connection; the central hub or switch may be turned off or have a problem; the network card may be damaged; IP addresses may be configured wrong; and may others more.
Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.