How many MC will 10000 BTU heater pull?

how many square feet does a 14,000 btu heater heat

1 HP = 2545 BTU/hour So 10000 is about 4 HP

A 35,000 BTU heater will heat a 10,000 square foot home.It is important to buy the correct size of heater for the home.

Burning Stove - 110,000 BTU How many square feet?

The price of a 5,000 BTU heater will vary depending on the brand, and the features. You can find many of them for less than 100.00.

Ratings are per hour. Divide 10,000 by 60 minutes per hour.

btu = 7500 watts * 3.14 btu / watt = 23,550 btus / hr

First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr

A 200,000 BTU wood burning stove will heat 1,000 square feet.

Recommend 400,000 BTU heater

input of gas heater The heater has its own BTU rating separate from the gas and the heat transferred. Every heater has an efficiency rating... for instance, a heater can be rated at 92%. This means that for every BTU burn in the heater, 92% of that BTU is transferred in to the water. The main premise behind BTU ratings and pool heating is that most forget the parallel factors involved. How many gallons, and what is the temperature rise? A 200k heater and a 400k heater can both handle, maintain, and work at the same efficiency. The true difference in them is the time it takes to create the rise in temperature. If the pool is 60 degrees, and you want the pool 80 degrees, then you'll need 1 BTU to raise each pound of water 1 degree. The only remaining variable is the quantity of water which will tell you the total weight of the water.

The number of square feet that an 8000 btu heater will heat can not be accurately determined just by knowing the output of the heater. Given a small, well insulated, energy efficient house that is located in a mild climate, 8000 btu could be sufficient to heat the entire house.

That is 50,000 BTU per hour.

A 10,000 BTU heater will use about 1/2 pound of propane per hour. Conversions to different types of energy being used (ie steam, KwH, etc.) will vary the answer, as will variations such as leaks, 02, temperature setting, efficiency, etc.

It's a mesure of heat. Just like the foot or meter is a measure of distance, the BTU is a mesure of heat. A 30,000 BTU heater puts out more heat then a 10,000 BTU heater.

BTU is a measure of energy, while a kilowatt is a measure of power. Energy is power times time. Energy: measured in BTU or kilowatt-hours Power: measured in BTU/hour or kilowatts. 100,000 BTU equals about 29 kWh so a 1 kW heater produces about 3400 BTU per hour.

Will a 40,000 btu furnace be enough to heat my 1375 square foot middle unit town house.

Depends on the BTU's of the heater. There are 93,000 BTU per gallon so you would take your BTU and divide by that number. 93,000 BTU per gallon / 30,000 your heaters BTU = just over 3 gallons per hour.

A 50,000 BTU heater will heat up an 800 to 2,500 square feet. Upgrading to a 60,000 BTU will heat up a room up to 3,000 square feet.

The Amana 12000 BTU Energy Star Room Air Conditioner with 11260-BTU Heater is good.

1 BTU is 1.055 kilojoules, 10,000 BTU = 10,550 kilojoules. If this is for 1 hour, the rate per second is 2.93 kilojoules, which is 2.93 kilowatts.

Look for any with an energhy star lable but the Amana 12000 BTU Energy Star Room Air Conditioner with 11260-BTU Heater is good.

Yes, a remote control is included with the LG 7000 / 3850 BTU Air Conditioner / Heater.

The 23,000 BTU Portable Kerosene Heater is not meant to be mounted on a wall, and it is a fire hazard to do so.

The cooling capacity is the same. It all depends on the application as to which is better. If you have a large room then the 1 10000 Btu unit would be the better fit and probably cheaper. But if you need to cool two small rooms then the 2 5000 Btu units would probably be better.