The power output of a nuclear power plant can vary, but on average, a typical nuclear power plant produces around 1,000 megawatts (MW) of electricity. This can vary depending on the size and design of the plant.
A 1 MW gas-fired power plant operating at full capacity for one hour would produce 1 MWh (megawatt-hour) of electricity. This is equivalent to 1000 kWh (kilowatt-hours).
As of 2007, worldwide there were 439 operational nuclear reactors with total capacity of 372,002 MW; making the average output 846 MW. However, the average new reactor can be expected to be larger. The reactors so far built in the US range up to about 1100 MWe electrical output, but new ones up to about 1500 MWe are planned
The largest nuclear power plant in the world is the Kashiwazaki-Kariwa Nuclear Power Plant, with an electrical generating capacity of 8212 MW. There is probably no theoretical maximum, since the number of reactors is rather arbitrary. I have provided a link to the Wikipedia article below.
It is not possible to determine the pressure in a 600 MW power plant without additional information. The pressure in a power plant depends on various factors such as the type of power plant (e.g., coal, natural gas, nuclear), the design of the plant, and the operating conditions.
It depends on the power rating. A typical nuclear power plant might be rated at 1100 megawatts, so that would be 1100 megawatt-hours in one hour.To translate that into SI units, one watt is one joule per second, so 1100 megawatts is 1.1 x 107 joules per second. Over the period of one hour, then, we are talking about 3.96 x 1010 joules.All of this is talking about net electric energy to the electric power grid. The actual reactor core produces about three times that in thermal energy. The difference is lost in conversion efficiency between the core and the end result.
The Vermont Yankee plant is currently licensed to produce 620 MW. It was originally licensed to produce 520 MW, but received an uprate in power output in May of 2006.
A 1 MW (megawatt) solar plant can produce 1 megawatt-hour (MWh) of electricity in one hour under ideal conditions. Since there are 1,000 kilowatt-hours (kWh) in 1 MWh, a 1 MW solar plant can produce 1,000 kWh of electricity in one hour.
A 1 MW gas-fired power plant operating at full capacity for one hour would produce 1 MWh (megawatt-hour) of electricity. This is equivalent to 1000 kWh (kilowatt-hours).
As of 2007, worldwide there were 439 operational nuclear reactors with total capacity of 372,002 MW; making the average output 846 MW. However, the average new reactor can be expected to be larger. The reactors so far built in the US range up to about 1100 MWe electrical output, but new ones up to about 1500 MWe are planned
The largest nuclear power plant in the world is the Kashiwazaki-Kariwa Nuclear Power Plant, with an electrical generating capacity of 8212 MW. There is probably no theoretical maximum, since the number of reactors is rather arbitrary. I have provided a link to the Wikipedia article below.
In 2008, the "average" nuclear power plant generated about 12.4 billion kilowatt-hours (kWh). There were 65 nuclear power plants with 104 operating nuclear reactors that generated a total of 808.97 billion kilowatt-hours (kWh), or almost 20% of the nation's electricity. Thirty-six of those plants had two or more reactors. The smallest nuclear plant has a single reactor with 476 MW of generation capacity and the largest has three reactors with a total of 3,825 MW of capacity. Source: US Department of Energy
It is not possible to determine the pressure in a 600 MW power plant without additional information. The pressure in a power plant depends on various factors such as the type of power plant (e.g., coal, natural gas, nuclear), the design of the plant, and the operating conditions.
It depends on the power rating. A typical nuclear power plant might be rated at 1100 megawatts, so that would be 1100 megawatt-hours in one hour.To translate that into SI units, one watt is one joule per second, so 1100 megawatts is 1.1 x 107 joules per second. Over the period of one hour, then, we are talking about 3.96 x 1010 joules.All of this is talking about net electric energy to the electric power grid. The actual reactor core produces about three times that in thermal energy. The difference is lost in conversion efficiency between the core and the end result.
The capacity of a power plant is measured in megawatts (MW) and represents the maximum amount of electricity that the plant can produce under specific operating conditions. It indicates the peak power output that the plant is capable of generating at any given time.
Neyveli thermal power plant and mettur hydro power plants are the two large power plants in Tamilnadu
This will be a hydro plant, or a series of them, not nuclear
It depends on the specific capacity of the wind turbines and the nuclear power plant in question. On average, it takes about 250-300 wind turbines with a capacity of 2-3 MW each to replace the output of a typical 1 GW nuclear power plant.