The maximum power of a Kaplan Turbine is about 230MW
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
Every hour a 1 Megawatt turbine would produce 1,000,000 watts. That would be the equivalent of 1,000 Kilowatts.
Depends on the generator size tied to the windmill fans. A one 1.8 MW wind turbine in a particular site would produce over 4,7 million units of electricity each year, which is enough to support the annual needs of over 1,000 households, or to run a computer for over 1,620 years. And that is something reliable.
200 MW is the rated power for such a turbine.
If a wind turbine could operate at maximum capacity all the time a 1 MW turbine could produce 8760 MW annually. However this is not the case, wind power is a slave to the elements, it only works when there is wind, and it only works at maximum when the wind is strong enough to spin the blades at maximum velocity. The percentage of capacity produced is variable, and can change hour to hour.
Using a boiler and turbine, the fuel consumption is about 0.3 pounds per horsepower per hour. So 500 MW would require about 90 tons of fuel each hour.
You've misunderstood something in order to even be able to ask that question. A watt is a measure of power, which is an instantaneous value. A 1.8 MW turbine produces 1.8 MW whenever it's turning at its rated speed. It sounds like you want to measure energy, which is power multiplied by time. If your power units are watts and your time units are seconds, then you get energy in joules (there are roughly 31.5 million seconds in a year, so if the turbine is at full speed the whole time, you get about 56.8 terajoules of energy).
Green energy is the idea. But to be honest, not much power is produced from each wind turbine, so they don't really help very much, that's why you need SO many of them. For instance a typical power station would be 2000 MW, a typical wind turbine is 2 MW. A typical power station could operate at 100% output for 90% of the time. A typical wind turbine operates at 50% output but is only operating for 50% of the time (when the wind is acceptable). So on average the power station can produce 1800MW whereas the wind turbine is about 0.5 MW.
TRIVENI turbine TDPS ALTERNATOR [10 MW] COUPLING
generally for a condensing turbine the quantity for generating one MW electricity the steam quantity remains 8.5 t/h. it will depend on the design of Turbine in Our project it is 5.5 t/MW
A 1.5 MW turbine is 80ms in height. A 3MW turbine is 90m in height. The world's largest-capacity turbine, the Enercon (7.58MW) is 198m in height.