Want this question answered?
Small generators are sized in watts. Watts is the product of amps times volts. To properly answer this question a voltage for your 10 amps must be stated. That said small generator outputs are usually 120/240 volts in North America. So 10 amps at 120 volts equal 1200 watts. 10 amps at 240 volts equal 2400 watts. A 3000 watt generator will be amply for your 10 amp load.
10 amps
A #10 copper wire in a NMD90 cable is rated at 30 amps.
It's watts divided by volts equals amps. Example: 1200 watts at 120 volts is 10 amps. To get the watts if you know the amps, multiply the amps times the volts. 10 amps at 120 volts is 1200 watts.
Yes. 240 volts at 10 amps is 2400 watts. The generator is 2500 watts maximum. If the generator is 2500 peak power it may not run it very long. If the continuous power rating is at least 2400 watts it should be OK.
Small generators are sized in watts. Watts is the product of amps times volts. To properly answer this question a voltage for your 10 amps must be stated. That said small generator outputs are usually 120/240 volts in North America. So 10 amps at 120 volts equal 1200 watts. 10 amps at 240 volts equal 2400 watts. A 3000 watt generator will be amply for your 10 amp load.
Replacing a lower amp generator with a higher one won't hurt. The 130 amp generator doesn't put out 130 amps, it is just capable of generating more amps if called on to do so by the system. For example, if your explorer only uses 10 amps, then the 130 amp generator will only put out 10 amps.
10-2 Amps
10 amps
10 amps
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
A #10 copper wire in a NMD90 cable is rated at 30 amps.
Ohm's Law: Voltage = Amperes times Resistance 9 volts = amps * 10 ohms amps = .9
It's watts divided by volts equals amps. Example: 1200 watts at 120 volts is 10 amps. To get the watts if you know the amps, multiply the amps times the volts. 10 amps at 120 volts is 1200 watts.
Not really. A 2000W generator will give you about 10 amps. Your normal RV air conditioner will draw 12-15.
There is zero watts in 10 amps.
It takes 13 amps Varies - but around 10 is a good average.