45000 / 208 /sqrt(3) = 125A per phase
this is probably called a boiler unless it has a 2000Gallon tank
That is a 3-phase transformer and the input current is 208/480 times the output current, in other words 54.2 amps.
8,33 Amps
10 Amps. Amps=Watts/Volts
30
To answer this question the wattage of the block heater must be stated. Amps = Watts/Volts.
40 amps
8,33 Amps
10 Amps. Amps=Watts/Volts
To answer this question the voltage of the heater must be given. I = W/E.
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.
Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous
30
To answer this question the wattage of the block heater must be stated. Amps = Watts/Volts.
Assuming it is a 208-volt line voltage (as normal in 3-phase) the phase voltage is that divided by sqrt(3), or 120 volts. Each phase has to supply 10 kW so the current on each phase is 83.3 amps.
40 amps
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
The GE water heater SE50M12AA01 is a 5500 watts or 5.5 Kilowatts water tank. The amperage on such a tank is I = W/E. Amps = Watts/Volts. Since most hot water tanks in North America use a voltage of 240, the amps will be 22.9 amps. It must be fed with a #10 conductor from a 30 amp breaker.
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.