amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
Some people use amps to change its quality. I've seen them do that before.
It depands on the power of the loudspeakers.
C batteries use 1.5 volts. The number of amps depends on what device it is hooked up to. An average for four C batteries would be about 16 amps.
because geddy lee(the bassist) uses house sound and he does not use amps and he dident want a bunch of empty space on the stage
magic sing mediacom
The current drawn by a surround sound system depends on many factors, in particular, the sound level at which it is running as well as the type of amplifier and processor used in the system. Although it is impossible to give an accurate figure, expect the system to draw around one to two amps while it is running with more being drawn at peak volume as well as at switch on. The manufacturer's information label will also state the maximum current the unit will draw.
Amp amplifies the sound quality and increase or decrease depending on use of it. There are also a important form of the circuit. All today's sound system use amp connections.
To make sound louder than it is (Speakers)
A typical domestic water heater uses 3 kW. On a European 230 v system it would use 13 amps.
1 HP = 745.70 wattsPower (watts) = Current (amps) x VoltsSo if you use a 110 volt system, amps = 745.7/110 = 6.779 ampsIf you use a 220 volt system, amps = 745.7/220 = 3.389 ampsFor a 12 volt system, amps = 745.7/12 = 62.142 amps
10 amps
You just have to divide the watts by the voltage to find the amps. For example 60 watts on a 120 v system would take ½ amp.
it may not sound great but why the heck not
a regular toaster uses about 12.5 amps
about 3 or 4
69
The electric heater will have power rated in Watts. The Amps it will draw depends on the voltage system you are using. Can be calculated by formula I (Amps) = P / V In the USA with 110V system a 2400W heater will draw 2400 Watts / 110 Volts = 21.8 Amps In Australia with a 230 V system a 2400W heater will draw 2400 Watts / 230 Volts = 10.4 Amps