Those units describe different types of quantities, and the question is something like
asking "How many hours are in 15 gallons ?".
When an electric current is consuming or dissipating 1,500 watts of power as it flows
from one point to another, then the number of amps of current is
(1,500) divided by (the voltage between the two points) .
To answer this question the voltage is needed.
1500 watts is zero amps. Watts is the product of amps times volts. Without stating a voltage an answer can not be given.
These values are two different entities. Watts is the product of amps x volts.
It depends on the volts. OHMS law. If it's 120 volts then 7.5 amps. If it's 240 volts then it's 3.75 amps.
To answer this question the voltage is needed. W = A x V. A = W/V
Divie 1500 watts by the voltage, that tells you the current in amps.
for calculating the amps , both watt and volts are required. else the answer would be infinity in terms of amp.
1,450 Watts = (1,450)/(the voltage) amperes.
Watt is a unit of power.
Ampere is a unit of electrical current.
For a relation you need to know the voltage.
900 watts is zero amps. Watts are the product of amps x volts. Without a voltage the amperage can not be calculated. A = W/V, Amps = Watts/Volts.
Amps * Volts = Watts. 50 Watts at 120 Volts = .4 Amps 50 Watts at 12 Volts = almost 4.25 Amps 50 Watts at 1 Volt = 50 Amps
0.83 amps
Amps * Volts = Watts Since you know the Watts, determine your voltage to determine the Amps. For example, if you are using 120 volts: Amps * 120 = 30 and from basic algebra Amps = 30/120 Amps = .25
The average lightning discharge seems to be between 5,000 and 20,000 amps but have been reported to reach 200,000 amps on very rare occasions.
Your question answers itself... 1000 watts, when operated on a 480-volt source..
23.6 amps
Watts are amps x volts, so w/o the volts the question can't be answered. At 100 volts it'd be 15 amps.
Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous
volts x amps = watts so 1500watts/12.8volts=117amps
A 1500 Watt heating element about 1500/110 or 13.64 Amperes from a 110V service. It is assumed the heating element is made from a resistive wire.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
1500 watts
9000 watts is zero amps. Amps are the product of amps times volts. Without a voltage stated an answer can not be given. I = W/E, Amps = Watts/Volts.
There are zero watts in 730 amps. Watts is the product of amps times volts. As you can see without a voltage no answer can be given.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.