Want this question answered?
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
Power equals voltage times current in amps. The value of amps used is needed to do the math.
The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
i have required lightings amps rating, how many circuit ku how much amps mcb fixing?
amps equals watts divided by volts.
A 15 amp circut will be fine.
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
300 Amps if used for service entrance conductors. Table 310.15
Power equals voltage times current in amps. The value of amps used is needed to do the math.
Grange insurance is an insurance company and is not specifically required to operate a boat. Boating insurance is however required in many areas. Check with your local laws on insurance requirements.
The formula is volts times amps equals watts, or watts divided by volts equals amps.
The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
i have required lightings amps rating, how many circuit ku how much amps mcb fixing?