MAC (Medium Access Control) addresses, part of the 802 family of IEEE standards, have 48 bits.
They are typically represented as six pairs of hexadecimal digits, eg: 00-11-22-DD-EE-FF (each digit is comprised of the hexadecimal digits 0-9 and A-F, from 0 to 15 decimal). Each hexadecimal digit is 4 bits in length, so the pair is 8 bits. Thus, the pair of numbers can represent decimal values from 0 to 255.
In some notations, the "-" is replaced with ":", eg 00:11:22:DD:EE:FF.
The pair of digits can also be referred to as an octet or a byte.
a TcP IPv4 ip address has 32 bits.
How many bits are there in a data link layer ethernet address?
Thirty bits make up the network portion of a class C address. Three bits are borrowed for the subnet mask. There is also a class A and a class B that are comprised of bits.
The size of an IPv4 address is 32 bits, or 4 bytes.
There are 24 bits, or six hex characters, for the preamble of the MAC address (i.e., 00:11:22 in the MAC address 00:11:22:33:44:55 or 0011.2233.4455).
32 bits in a IPv4 address
You need 20 bits of address bus to address 1 Mb of memory.
In IPv4, which is the current standard for IP addressing, an IP address is 32 bits. The most commonly used format is called dotted decimal, which means that the 32 bits is broken into 4 octets of 8 bits each, and represented with their decimal equivalent separated by decimal points. Since the decimal equivalent of an octet ranges between 0 and 255, this means that an IP address ranges from 0.0.0.0 to 255.255.255.255. However, not all addresses are valid1. In IPv6, which is the new emerging standard, an IP address is 128 bits. The most commonly used format is hexadecimal colon format, where each group of 16 bits is represented by four hexadecimal digits and separated by a colon. Sequential groups of 16 zeroes are represented by two colons. An example IPv6 address is 2001:0DB8:AC10:FE01:0000:0000:0000:0000, which can be abbreviated 2001:0DB8:AC10:FE01::. ---------------------------------------------------------------------- 1Generally, the lowest address in a subnet is reserved for routing, and the highest address in a subnet is reserved for broadcast. Also, there are some special addresses, with reserved meanings.
A MAC address consists of 48 bits, usually represented as a string of 12 hexadecimal digits
The address bus in the 8085 is 16 bits wide.
2046 Breakdown: 11111111.11111111.11111000.00000000 /21 - 21 bits in network address represented by ones in binary address above. Leaves 2^11th power host addresses left (the zeros to the right). Equals 2048 host addresses minus the two reserved addresses = 2046
48 bits is a typical MAC address in bits.
In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.
A Mac address is a 48bit addressing scheme (usually represented in HEX). There are 8 bits in a bytes therefore it is 6 bytes long.
It requires 30 address bits to address 1GB of RAM.230 = 1,073,741,824
An IP address comes in two formats: ipV4 and ipV6. In IpV4 32 bits are allocated to the IP address. In IpV6, 128 bits are allocated to the address. This is done by the protocol and is a standard for developing an IP address.
IPv6 address