10 bits
10 bits
1
In burst error, it is not necessary that only consecutive bits are changed. The length of burst error is measured from first changed bit to last changed bit. As shown in fig. length of burst error is 8, although some bits are unchanged in between. Burst error is most likely to occur in a serial transmission. The noise occurring for a longer duration affects multiple bits. The number of bits affected depends on the data rate & duration of noise. For e.g. if data rate is 1 kbps, a noise of 1/100 second can affect 10 bits.
1
The maximum effect of a 2-ms burst of noise on data transmitted at 12 kbps can be calculated by determining how many bits are transmitted during that time. At 12 kbps, 2 ms corresponds to 24 bits (since 12,000 bits per second multiplied by 0.002 seconds equals 24 bits). Therefore, a 2-ms burst of noise could potentially corrupt or disrupt the transmission of up to 24 bits of data, depending on the nature of the noise and the error correction mechanisms in place.
Turns down the quiet bits
Noise does not affect taste. However, a noisy environment may also include dust and chemicals that could affect the taste.
Because of it noise,it has too much noise
It has many negative effects: it makes people deaf, it causes headaches, it also affect the nervous system.
16 bits
19,200 bits.
geological noise electronic noise vacuum cleaner gas lamp uncontrolled ground noise