If you are asking how many bolts hold it to the engine, Then it is 6
2 on the top and 2 on each side. If that was not your question then PLEASE ask it again.
It should be a 700R4
The 1984 700R4 will interchange with a 1988 700R4. The lock-up harness would have to be modified, changed or have a hydraulic lock-up kit installed. An easy fix would be to put the harness and swithes from the 1988 transmission into the 1984 transmission. The 1984 transmission is a weaker design but a working transmission will get you going.
This will depend on how many bolts it has. If the vehicle has 13 bolts you will need a THM400. If it has 16 bolts it will need a THM700-R4.
The doors on a 1984 Chevy Silverado truck are adjusted by first loosening the retaining bolts. The door is then shifted into the desired position and the bolts re-tightened.
no
Not hard if you are mechanically inclined. Having a donor vehicle that is the same as your truck but automatic is key. This would give you all the parts, nuts, bolts, brackets, linkage, etc to do the swap.
No, different bolt patterns.
How many bolts are on the 454 1984 chevy
YES.
First of all, The 97 trucks did not have the 700r4 in them. The 1/2 tons had the 4L60E and the 3/4 tons used the 4L80E. Any year 700r4 transmission will work in the 84 as long as it is out of a truck.
should but check with junk yard they have the book
1900pounds