There should be 4 lugs. Unsure about the spacing, but the wheel size is P175/70R13.
First of all the Escort is a station wagon. Take a tape measure and and measure the inside for length x width x height. Of course having to allow for wheel-wells in the back.
Yes , it's front wheel drive
116 inchs
According to a drawing in the 1997 Ford Escort Owner Guide : On the right side of the steering wheel column is a lever that operates the windshield wipers . On the inner part of the lever , towards the steering wheel , is a selector switch for the rear wiper / washer on the wagon
Subaru Outback is historically the best selling station wagon in the US. They are top rated for safety, reliability and performance. They feature All Wheel or 4 Wheel drive. Subaru's last a long time.
To remove a wooden wagon wheel, first ensure the wagon is stable and secure. If the wheel is held in place by a hub or axle, locate and remove any retaining pins or bolts. Gently tap the wheel with a rubber mallet to loosen it from the axle, then pull it off carefully. If the wheel is stuck due to rust or debris, applying a lubricant may help ease its removal.
To dismantle the steering column of a 1995 Volvo 850 Station Wagon, first disconnect the battery to ensure safety. Remove the steering wheel by unscrewing the central nut and using a steering wheel puller if necessary. Next, detach the plastic shrouds around the column, usually held in place by screws or clips. Finally, disconnect the wiring harness and any mounting bolts to free the column from the vehicle.
you idiot you cant
its a uni-body, and why would you want to lift a front wheel drive station wagon?
the answer to your question is easy the simple machine a wagon wheel is a wheel and axel
Wagon Wheel - song - was created on 2004-02-24.
This usually is what I call a strut tower. USE CAUTION WHEN TAKING THIS ITEM APART AS THE SPRING IS UNDER GREAT PRESSURE AND WILL CAUSE INJURY. remove speaker grilland seat back extension, remove rear wheel. support the strut spindle, remove brake hose clip, hang brake hose out of way, remove bolts from strut base, remove upper nuts, lower the assembly and remove it.