That depends on what the starting temperature of the water is,
and what temperature you want it to reach.
If you expect to get a number, you must first give the necessary numbers.
400 k BTU - But it depends on the gas line size feeding the heater; how long that run is etc. The larger heater will heat the water quicker thus cost for heating will be less ( than if you used a 250K BTU)
How many Btus if 1 cubic foot of Liquid Petroleum
3 tons of refrigeration = 36,000 BTU's
That depends on how much water you have, and what temperature it's starting at.If you have one pound of water, and its temperature is 40° F, then it will cool to 39° Fif you pull exactly one BTU of heat out of it.Different amounts of water, or different starting temperature . . . different amounts of heat.
its usually about 20 btu's per square foot
You would need to remove approximately 1200 BTUs of heat to convert a gallon of water to ice. There are 8.34 lb in a gallon of water, which converting to lb-moles is 0.463. The latent heat of crystallization for water is -2583.4 BTU/lb-mole. Multiplying the two together and you get -1197 BTUs, which means you need to remove that amount of heat to convert the gallon of water to ice.
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.
About 114,000 BTU per US gallon.
4800 BTUs will 150 square feet.
One gallon of kerosene will produce 134,000 BTUs of energy when burned.
100 BTU if it's Fahrenheit
how many square feet will 26,000.00 heat
1 BTU = heat corresponding to change in temperature of 1 pound of water by 1° Fahrenheit.Weight of 1 gallon of water = roughly 8.33 poundsHeat corresponding to change in temperature of 1 gallon of water by 1° Fahrenheit = 8.33 BTU.But it doesn't take that, i.e. you don't have to supply it. You're talking about lowering thetemperature, so you're just allowing the water to cool on its own. As it does, it releases8.33 BTU of heat, which you can then collect and take away to use somewhere else.
about 12,000
The answer depends on the city. Somewhere like Colombo (Sri Lanka) will probably require 0 btus.
Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.
400 k BTU - But it depends on the gas line size feeding the heater; how long that run is etc. The larger heater will heat the water quicker thus cost for heating will be less ( than if you used a 250K BTU)