0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why is there a limit to the number of devices that may be connected to a single electrical outlet?
The cabling to the outlet can only handle a maximum power. For safety reasons, this is limited to far below the fail level by a fuse or circuit breaker. If you exceed the power rating, you run the risk of causing a fire.
Can you wire a dimmer to control an outlet?
Yes, but it must then be clearly labeled that it is only for devices that are dimmer compatible (no motors, no fans, no computers, no nondimable lights, etc.) This might reasonably be done for an outlet that is dedicated to a single lamp.However some electrical codes may prohibit this (even though it can be done) for safety.
How by looking at a socket can you tell the difference in a double or single pole?
Single or double pole is usually a switch. 110 or 220 on a plug, 110 is usually a double outlet. 220 is usually or always a single outlet. Design of the outlet will vary depending on what is plugged into it. The slots can be 1 vertical and 1 horizontal. Both slots can be at an angle. If a regular 110 cord will not plug into an outlet, good chance it is a 220
Two no12 wires running through an outlet box will require a free space volume of what?
The space within the single pole outlet box.
What size inverter in watts is needed to run a 1.5 horsepower motor?
To answer this question, the voltage whether the supply is single or three phase, of the 1.5 HP motor must be given.
Can a single phase inverter's working principle can be explained?
in single phase inverter we use two chopper the ratio of output ac to the ratio of input dc
How single EX-OR gate can be used as inverter?
tie one input to permanent 1 level, use other input as inverter input.
DC Inverter: A Traveler's Friend?
Besides the clothes, wallet, and sunscreen, today's traveler also totes a host of high-tech gadgets. Nobody on a road trip wants the added annoyance of keeping track of all the car adapters as well. Plugging a single DC inverter into the vehicle's cigarette lighter or power port allows the driver to operate or charge any low-power electric device, plugging it in to the inverter the same way it would be plugged into a wall outlet. Laptops, PDAs, cell phones, and cameras can be kept charged on the go. Many inverters also offer a battery protection feature that will automatically shut down if the vehicle's battery is getting depleted. A DC inverter ensures that tech devices will remain fully charged and ready for use.
How do you design a multilevel inverter?
the design of multilevel inverter can be done by using is the mosfets ....multilevel inverter is the inverter which cna reduce the harmonics by increasing the voltage levels ANSWER: The design of multilevel converter is the same as a single converter. The feedback control however comes from the most hi current output capacity circuit.
Why is there a limit to the number of devices that may be connected to a single electrical outlet?
The cabling to the outlet can only handle a maximum power. For safety reasons, this is limited to far below the fail level by a fuse or circuit breaker. If you exceed the power rating, you run the risk of causing a fire.
How many devices can be used on a single SCSI bus?
8 Devices can be used on a single SCSI bus.
What is the difference between a half bridge and a full bridge inverter?
A half bridge inverter is an electronic circuit that uses different phases to do what it needs to do. A full bridge inverter is a single phase device so a half bridge is more complicated than a full bridge.
Can you wire a dimmer to control an outlet?
Yes, but it must then be clearly labeled that it is only for devices that are dimmer compatible (no motors, no fans, no computers, no nondimable lights, etc.) This might reasonably be done for an outlet that is dedicated to a single lamp.However some electrical codes may prohibit this (even though it can be done) for safety.
What has the author Francisco A Guillen written?
Francisco A. Guillen has written: 'DC-side single commutation inverter'
How do i get a regular sized USB for an adapter with a single headphone jack?
i need an 8th inch to usb adapter with a full sized USB with a single headphone jack plugin
How do you connect 3 phase inverter to single phase supply?
It depends on the 3 phase inverter. If it is a 3 phase input then you will first need to get a single phase to 3 phase converter to simulate a 3 phase supply, if that is what this particular inverter is intended for then you will have a label saying 230v primary with a L & N connection point, and the output will be labelled as secondary, giving you the inverted power rating. This is a very expensive way of running machinery as the inverted power is no different in conumption to the single phase.
How by looking at a socket can you tell the difference in a double or single pole?
Single or double pole is usually a switch. 110 or 220 on a plug, 110 is usually a double outlet. 220 is usually or always a single outlet. Design of the outlet will vary depending on what is plugged into it. The slots can be 1 vertical and 1 horizontal. Both slots can be at an angle. If a regular 110 cord will not plug into an outlet, good chance it is a 220
