There is actually 4 motor mounts...i don't know if its different between v6 and 4cyl, or coupe and sedan but i have a 2000 Honda accord coupe v6 and it has 4 motor mounts...a rear, front, left and right
Added by tehJuice1:
I have that car and was told there were three mounts, Front Engine Mount (by Front Radiator) Left Mount (By Timing Cover) Rear Mount (By Fire Wall) . Hope someone can clarify because I saw sets of mounts that were 3pc for 2000 Accords and 4 pcs for 1999 Accords.
possibly
yes.
Click the link.
Connected to the engine on the drivers side.
Changing the struts on a 2000 Honda Accord requires removing the lower control arm, ball joint, and strut mounts. An alignment is suggested after installing new struts to provide the best drivability.
yes, but you will have to buy mounts, transmission, linkage, axles, ecu and front spindles, you will have to change your wiring harness and go backwards to an obd1 harness, or use a jumper harness.
With modifications probably - - but the CR-V was powered by the Civic engine that year and would probably be under-powered for the larger Accord.
160
The timing belt on a 2000 Honda Accord should be changed every 75,000 miles. Failure to change at the appropriate time can result in engine failure.
I need to find out the timing degrees on a Honda Accord 2000
86 or higher
yes. it requires mounts and loom. but any vtech engine will fit