two
The space shuttle was launched into space using a combination of solid rocket boosters and liquid fuel engines. The boosters provided the initial thrust needed to get the shuttle off the ground, while the main engines continued to propel it into orbit. Once in space, the shuttle would orbit the Earth until it was ready to re-enter the atmosphere and land back on Earth.
There are actually two types of boosters that were both used by the space shuttle before their decommission. To propel the vehicle out into space from the surface of the earth out past the atmosphere, the shuttle used SRB's, or Solid Rocket Boosters. The engines on the actual shuttle are LRB's, or Liquid Rocket Boosters. These are used to propel the space vehicle further into space and into orbit around the earth.
The Space Shuttle used two solid rocket boosters during liftoff. These solid rocket boosters provided the additional thrust needed to propel the shuttle into orbit before separating and falling back to Earth.
first the rocket boosters carry it into space then the external tank pushes the shuttle above earth then when the shuttle is ready the external tank falls off and the shuttle is ready for its mission then after its mission the shuttle lands and blows out a parachute come out from the back to help the shuttle slow down.any parts from the rocket or shuttle can be reused except the external tank.
The Space Shuttle flies into space using a combination of its powerful solid rocket boosters and its main engines. Upon liftoff, the solid rocket boosters provide the majority of the thrust needed to overcome Earth's gravity. Once the shuttle reaches a certain altitude and velocity, the boosters are jettisoned, and the main engines continue to propel the shuttle into orbit. After reaching space, the shuttle's orbital maneuvering system helps it adjust its trajectory for docking or other mission objectives.
The space shuttle uses its rockets to propel itself off the launch pad and into space. It accelerates vertically until it reaches a certain altitude before pitching over and heading into orbit around Earth. The solid rocket boosters are jettisoned first, followed by the external fuel tank, leaving the shuttle with just its main engines to continue its journey.
The Shuttle is put into orbit using the two SRB (Solid Rocket Boosters) and the large External Tank during lift-off. For maneuvering in space (and the gradual approach to the space station) the orbiter's two engines (one on either side of the tail) are used.
the space shuttle always, no matter what, has a maximum speed of 18,000 mph. the shuttle takes 17,500 mph to reach orbit. because of more fuel, it wouldn't go faster, it would just last longer.
The space shuttle is a reusable spacecraft. It has 3 main engines powered by liquid fuel which are used to launch it into orbit with help from similarly reusable solid fuel boosters (the white rockets along the side of the shuttle during launch). When returning after a mission, the space shuttle is unpowered and glides back for a landing. See related question.
The space shuttle's main engines provided approximately 418,000 pounds of thrust each, and the solid rocket boosters provided an additional 1.3 million pounds of thrust each. Together, this allowed the space shuttle to break Earth's orbit and reach space.
The space shuttle was a reusable spacecraft that launched vertically and landed like an airplane. It consisted of an orbiter, solid rocket boosters, and an external fuel tank. The orbiter housed the crew and payload, while the boosters provided additional thrust during liftoff. The shuttle utilized a combination of liquid fuel engines and solid rocket boosters to reach orbit, and then glided back to Earth for landing.
space shuttle orbiters are launched from the Kennedy Space Center in Florida. They must not only travel the ~250 miles to reach "space", they must accelerate to over 17,000 mph to maintain orbit around the Earth. The shuttle orbiter uses its 3 main engines along with a pair of solid rocket boosters to do this.