Want this question answered?
kill urself
It doesn't have any. It has 1 Fast ethernet port, 1 console port and 1 aux port that is for a modem.
ethernet cables are used to connect many items. Such as:Printer to computer,Ps3 to laptop,ps3 to router
On a Cisco router, you can define all the ACLs you want. However, considernig the ones that are actually assigned to an interface (an unassigned ACL won't do anything useful), you can have one ACL per interface, per direction (in vs. out), and per protocol (for example, IPv4, IPv6, IPX, etc.). If you consider only IPv4, you can have six ACLs for the three interfaces.
It is a six port ethernet bridge with six computer capability networking.
a modem takes cable input and output goes to only 1 Ethernet cable. A router takes the 1 Ethernet cable and makes it so that you can hook up four or five Ethernet cables. a wireless router allows you to hook up 4 or 5 Ethernet cables and unlimited amounts of wireless receivers. If you only have 1 computer, you don't need a router. You only need 1 Ethernet cable. To put it in simple terms : Yes, many newer external modems have full router and firewall functionality built-in to a single device
A router will typically support between 4 and 8 ports. For additional ports, a standard Ethernet switch can be connected to one of the ports.
It depends on how many interfaces of router are connected to other networks. If a router is connected to two network, it will have 2 IP addresses. In a router having 4 ports it can connect to maximum 4 networks. In this case it will have 4 IP addresses.
A wired router is able to spilt the Internet signal and send it down Internet cables or Ethernet cables. It is capable of sending the signal to many different computers.
You can buy a router and 4 ethernet cables if the PCs do not have WiFi or a WiFi router and however many ethernet cables that you need would be a better solution and would also give you a WiFi capability for other devices. Routers can cost from a wide range and are often sold at below retail prices and the same for ethernet cables. While you could spend over $200 it is possible to be under $50 depending on the type of router and the brand and length of the ethernet cables
The Cisco 2600 series routers are used to tie networks together, usually at the Access level.Each 2600 router has 1 or 2 Ethernet or Token Ring LAN interfaces, a Console and Aux port, and 2 WIC (WAN Interface Card) slots and an NM (Network Module) slot.WIC cards can be used to give the router 1 or 2 Serial WAN connections each, or things like ADSL interfaces, T1 cards, etc.NM modules can be used to give the router things like 2 extra WIC slots, 1 or 4 Ethernet ports, 4 slow serial WAN ports, 16 or 32 serial ports for controlling other routers, and many more.2600 series routers are also obsolete and no longer sold.
You connect your PS3 to the router and then to the internet modem with ethernet cables. The PS3 has a single spot in back to plug in the cable and the router has many spots in back to connect. The router will be connected to the modem. Once the cables are in place go to the settings on the PS3 and then Network connections.