0
How many fire extinguishers are required on board an 18 foot power boat with installed fuel tank?
Wiki User
∙ 11y ago
At least one USCG-approved Class B-1 fire extinguisher is required on any powerboat, unless it is under the following exception:
- "motorboats less than 26 feet in length,
- propelled by outboard motors and
- not carrying passengers for hire, need not carry such portable fire extinguishers if
- the construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors" [bullets added]
A UL-listed 5-B:C extinguisher, with 2 pounds of dry chemical, may provide the basis for the extinguisher, but it must ALSO conform to USCG-approvals (proper corrosion protection, labeling, mounting bracket, etc).
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
The installed on a motherboard and the chipset embedded on the board primarily determine the power and features of the system?
Processor
What is installed on a motherboard and the chipset embedded on the board primarily determine the power and features of the system?
Processor
Installed on a motherboard and the chipset embedded on the board primarily determine the power and features of the system?
processor
In Hawaii is required to be installed on a power driven recreational use boat?
Exhaust muffler
The processor installed on a motherboard and the chipset embedded on the board primarily determine the power and features of the system?
True
What indicates the power supply sending steady power to the system board or VRM?
what indicates the power supply sending steady power to the system board
You live in a 5 story condo unit and you are putting a hot tub on the 2nd floor and the contractor is telling you that in order to get a 220v outlet outside hes is going to have to put in another box?
Read your governing documents to determine whether or not board approval is required for this installation. If it is, the association's power grid must be inspected to ascertain how to power your installation. If no approval is required, best practices dictate that you advise the board of the installation, to verify whether or not additional insurance is required based on your upgrade.
How do you remove the power supply board in a Hitachi 60ux58b TV?
In order to remove the power supply board in a Hitachi 60UX58B, first unplug the TV. Then, unscrew the rear panel. Disconnect all parts that are connected to the power supply board. Remove the screws that are holding the power supply board to the chassis. Lift the power board off the chassis.
Why is there no power after a new battery has been installed?
The Do
What holds all of the other circuit boards in a computer?
The case of a computer has mounting brackets inside it, to this is attached a motherboard. installed on the mother board are various other circuit cards which aid in making the computer work. Other devices, such as; CD drives, hard drives and power supplies are installed in their own particular mounting bracket.
What version of power shell is installed on windows 7?
Version 6.1 is installed on my Windows 7 computer.
Which internal component of a computer uses a 3-pin power connector?
Fan. But only two are used for power. The third is used to control the fan speed. There should be indication on the board to tell what this fan is for / where the fan for that particular powe connection should be installed.
