0
There is little consensus on the exact amount of water that flowed continuously in the nine+ two aqueducts from the Tiber river to Rome. The lowest was estimated at 85063 gallons per day to a high of 266978.35 gallons a day.
Recent estimates put it at 158503.23 -176995 gallons with supply of 58.503 gallons in each of the 591 [ lacus] delivery point with consumption of 15.85-17.69 gallons per capita for 900 Romans at each delivery point.
Wiki User
∙ 13y ago
Wiki User
∙ 12y ago264 per gallon
Add your answer:
Earn +20 pts
Why did the Romans use mountains?
The mountains near Rome provided plenty of water sources. When Rome's demand for water outstripped local supply, the Romans started to build aqueducts to bring water from the mountains. Over time the Romans built 11 aqueducts to supply their city
How did the Romans preserve building materials when building aqueducts?
The Romans were great engineers and invented cement. The cement that they used was water proof so they could use it underwater and in fountains or aqueducts. The engineering of the aqueducts included cisterns and tunnels through and in mountains or rock. Many of these still exist. some of the aqueducts outside Rome are still standing and the aqueducts of Merida and Segovia are well preserved. One of the aqueducts of Rome, the Aqua Virgo is still working. Much of the Roman building materials have lasted through time but much has been destroyed by the ravages of war, theft the use of materials for rebuilding after the fall of the Roman Empire.
What are the first roman aqueducts?
The Roman aqueducts supplied water for many cities in the empire. The first aqueduct, the Aqua Appia, was built in 312 BC and supplied the city of Rome. For many scholars, the development of Roman engineered aqueducts was another piece of architecture that was new to the ancient world. At the peak of ancient Rome's population, it is estimated that as much as 300,000,000 gallons of water was furnished each day. At its peak, Rome was served by 11 aqueducts. For the ancients, the construction of the aqueducts tested their ability to build anything that was needed. To secure the water supply by this method, Roman engineers had to perfect and carry out their proper elevation and gradients. The sources of the water supply were natural springs on mountains. There were Approximately 1,300 miles of aqueducts in the empire; the aqueducts that served Rome totalled 300 miles. The aqueducts were then spread about the city via lead lined pipes. The underground water supply and the sewerage system was un paralleled for its time. The structures of the aqueducts were of stone, cement, & concrete. The pipes were lined with lead from start to finish. This massive display of public works reached the point whereby a "department of Water" was established and headed by an engineering type person. Aqueducts were not built in any one particular place. They were built wherever they were needed. Several cities in the empire had aqueducts.
How did the aqueduct change life in Rome and the world?
The aqueducts gave them a clean water supply and it was technologically advanced water transport system. Roman engineers who built their roads and bridges and siege warfare weapons helped to build the Roman empire.
Did ancient Greece have aqueducts?
Not much is known becuase there are very few archaeological finds and the Greeks did not write about this. One archaeological find, the Tunnel of Eupalinos on the island of Samos, was an underground water conduit.
Why did the Romans use mountains?
The mountains near Rome provided plenty of water sources. When Rome's demand for water outstripped local supply, the Romans started to build aqueducts to bring water from the mountains. Over time the Romans built 11 aqueducts to supply their city
How did the Romans preserve building materials when building aqueducts?
The Romans were great engineers and invented cement. The cement that they used was water proof so they could use it underwater and in fountains or aqueducts. The engineering of the aqueducts included cisterns and tunnels through and in mountains or rock. Many of these still exist. some of the aqueducts outside Rome are still standing and the aqueducts of Merida and Segovia are well preserved. One of the aqueducts of Rome, the Aqua Virgo is still working. Much of the Roman building materials have lasted through time but much has been destroyed by the ravages of war, theft the use of materials for rebuilding after the fall of the Roman Empire.
What are the first roman aqueducts?
The Roman aqueducts supplied water for many cities in the empire. The first aqueduct, the Aqua Appia, was built in 312 BC and supplied the city of Rome. For many scholars, the development of Roman engineered aqueducts was another piece of architecture that was new to the ancient world. At the peak of ancient Rome's population, it is estimated that as much as 300,000,000 gallons of water was furnished each day. At its peak, Rome was served by 11 aqueducts. For the ancients, the construction of the aqueducts tested their ability to build anything that was needed. To secure the water supply by this method, Roman engineers had to perfect and carry out their proper elevation and gradients. The sources of the water supply were natural springs on mountains. There were Approximately 1,300 miles of aqueducts in the empire; the aqueducts that served Rome totalled 300 miles. The aqueducts were then spread about the city via lead lined pipes. The underground water supply and the sewerage system was un paralleled for its time. The structures of the aqueducts were of stone, cement, & concrete. The pipes were lined with lead from start to finish. This massive display of public works reached the point whereby a "department of Water" was established and headed by an engineering type person. Aqueducts were not built in any one particular place. They were built wherever they were needed. Several cities in the empire had aqueducts.
What city was the roman aqueduct built in?
The Roman aqueducts served many cities in the empire. The first aqueduct was the aqua Appia, built in 312 BC. For many scholars, the development of Roman engineered aqueducts was another piece of architecture that was new to the ancient world. At the peak of ancient Rome's population, it is estimated that as much as 300,000,000 gallons of water was furnished each day. At its peak, Rome was served by 11 aqueducts. For the ancients, the construction of the aqueducts tested their ability to build anything that was needed. To secure the water supply by this method, Roman engineers had to perfect and carry out their proper elevation and grade. The sources of the water supply were natural springs on mountains. There were Approximately 1,300 miles of aqueducts in the empire; the aqueducts that served Rome totalled 300 miles. The aqueducts were then spread about the city via lead lined pipes. The underground water supply and the sewerage system was un paralleled for its time. The structures of the aqueducts were of stone, cement, & concrete. The pipes were lined with lead from start to finish. This massive display of public works reached the point whereby a "department of Water " was established and headed by a engineering type person. Aqueducts were not built in any one particular place. They were built wherever they were needed. Several cities in the empire had aqueducts.
How did the aqueduct change life in Rome and the world?
The aqueducts gave them a clean water supply and it was technologically advanced water transport system. Roman engineers who built their roads and bridges and siege warfare weapons helped to build the Roman empire.
Did ancient Greece have aqueducts?
Not much is known becuase there are very few archaeological finds and the Greeks did not write about this. One archaeological find, the Tunnel of Eupalinos on the island of Samos, was an underground water conduit.
How much money should you bring to rome?
You should bring roman money!
How did ancient roman farmers irrigate?
did the acient rome people have farmers ? and can you explain to me ?? and Hunters ? what did there daily actitives look like ? did they make things ?
Who created the aqueducts?
Aqueducts were built by pretty much all ancient civilisations.
How do places that don't receive much rainfall get their water?
Places that do not receive much rainfall get their water from mountain streams that drain into aqueducts. They also get their water by way of man made reservoirs.
How does the roman aqueducts have an influence in todays society?
There is one main difference between the ancient aqueducts and our water systems is that the water from the aqueducts went directly to the people (or to a holding tank, as in Pompeii) Our water is piped like an aqueduct, but it goes through a filtration system to rid it of pollutants and harmful bacteria.
Why was frontinus so proud of the roman water system?
Frontinus was appointed commissioner of the aqueducts. He had plenty of reasons to be proud of the aqueducts. They were a major engineering achievement. The Romans took the construction of these structures to a much higher level than previous or contemporary civilisations through their vast improvements in bridge-building technology. This allowed them to pace the water conduits on bridgeworks when they needed to cross a valley or, in flat areas, when they needed to keep a gradient to keep the water flowing. It enabled the Romans to build hundreds of aqueducts around their empire, a feat which had been previously impossible. In addition to the above, aqueducts were essential to supply towns with fresh water from the sources on the mountains. The Romans built many aqueduct to supply a growing demand for water caused by Rome's expanding population.
