165
Cord a to cord b to cord e
a cord b cord c cord then all over again
To connect your guitar to an amplifier using a guitar cord, simply plug one end of the cord into the output jack on your guitar and the other end into the input jack on the amplifier. Make sure both the guitar and amplifier are turned on and adjust the volume and tone settings as needed for the desired sound.
Guitar Patches or Patch Cords are simply just the cord going from the guitar to the amp.
There is a power switch on the guitar
To connect your guitar to an amplifier using a guitar cord, plug one end of the cord into the output jack on your guitar and the other end into the input jack on the amplifier. Make sure both the guitar and amplifier are turned off before connecting to avoid any unwanted noise. Adjust the volume and tone settings on both the guitar and amplifier to achieve the desired sound.
Not quite sure what your asking, If its buzzing because the jack is the problem then you probably need to re solder the wires in either the guitar or the cord, if its the cord it would be easier to just buy a new cord. If its buzzing when the guitar isn't plugged into the amp the try adjusting the truss rod.
Chord. As in a group of notes which harmonise.
1/4 inch.
you plug in the cord to your usb on your xbox.
Insert cord into the the hole in the cd port
Open the back of the guitar, then plug the cord from the guitar into the back of the remote. Insert the remote into the guitar (I tend to put the bottom of the remote in first), then close it up.