I am just your standard home mechanic so I take longer than the average joe that does this for a living. They would probably take half as long as I do. Since I just replaced mine on a 4 cyl I have a good idea of the time. From start to finish it took me 12 hours. 2 days of work. I also had the exhaust give me a few problems and I had to redo a hole that stripped. There were several hoses in the intake manifold that caused me issues and I needed to adjust the valves, twice to get rid of noise. What helped is I had all the pieces ready and clean when I started the job and all the gaskets handy.
three hours
On 4 cylinder it takes about 20-30 minutes. For V-6 it might take couple hours.
how many hours does it take to replace timing belt in a toyota 4x4 3.0
1
To do it yourself, a couple dollars. The gasket is cheap. To have someone do it for you, they'll charge several hours and the cost will depend on their hourly rate.
i read seven hours
it depends on your skill and the facilities you have to work with. if you came to my shop we would charge 3.2 hours to replace it.
2.5 Hours
2 hours
4 to 5 hours.
This is not a simple job.It takes about two hours just to remove it,and I would not attempt it without putting the car on a lift. My advise:take it to a mechanic who has done it before......
2 hours.