Of course OK,You can use LED bulbs replace traditional bulbs with existing socket and voltage.I work in a manufactory of LED lights in China,if you have more quetions,you can send E-mail to me:hxg000000@hotmail.com
A satellite DVR uses about 80 watts. This value can be found where the plug in cord meets the chassis of the recorder.
A satellite DVR uses about 80 watts. This value can be found where the plug in cord meets the chassis of the recorder.
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
From halogen to LED you can divide by 4 to find the equivalent. Therefore an 80 watt LED would do the job.
It depends on which lights get used. A 100-count string of incandescent mini lights runs at 40 watts, while a 70 count of 5mm Wide Angle LEDs is approximately 4.8 watts total. In fact, because incandescent wattage is 80-90% more than LED wattage, the cost to power an incandescent can be up to 90x greater than powering an LED. Calculate Amps by dividing total wattage by 120 volts (US household outlets carry 120 volts) So about .33 for incandescent and about 4 for LED.
Of course OK,You can use LED bulbs replace traditional bulbs with existing socket and voltage.I work in a manufactory of LED lights in China,if you have more quetions,you can send E-mail to me:hxg000000@hotmail.com
60-80 watts
The wattage of a 42 inch LED TV varies by make and model. The average wattage is 48 watts.
The electrical code states that circuit conductors that are fed by this breaker on a continuous load can only be loaded to 80%. Therefore you can have a load of 1,920 watts on this circuit. Assuming you install 8 watt bulbs you can have 240 on this circuit.
If we assume that you are using a common 15 Amp lighting circuit and switch and using 120 volts to power the bulbs then you need to keep the wattage at 80% of 15 amp worse case or 12 amps. Watts = amps x volts for standard incandescent bulbs. 12 x 120 = 1440 watts.
80
Solar panels can make enough watts to power your whole house if you have enough of them. Some solar panels will generate 50 watts, 80 watts or 120 watts.
Look on the bottom it says it there...........but about 60 to 80
1 kilowatt equals 1000 watts. An 80 watt solar panel under ideal conditions produces as you might guess 80 watts. So under ideal conditions it would take 12.5 hours for the panel to produce 1000 watts. (1000/80=12.5)
A satellite DVR uses about 80 watts. This value can be found where the plug in cord meets the chassis of the recorder.
A satellite DVR uses about 80 watts. This value can be found where the plug in cord meets the chassis of the recorder.