0
A base board heater could be rated at any amount of watts. Their physical size usually has no bearing on the wattage but that being said usually the smaller the physical size the lower the wattage. A three foot unit at 240 volts could be 500 watts or .5 kW. The rating of the heaters is on the back of the heater. If the heater is mounted and you want to know how many watts it is, you will have to remove the heater away from the wall to get to the nameplate. If you have access to a clamp on amp meter, the amperage reading can be multiplied by the voltage of the heater. This will give you the wattage of the device. To find kW divide the wattage of the heater by 1000. The amount that the heater uses in kW s depends on its off and on time cycle. This is referred to as kWh. This is the figure that the utility company uses, times how much they charge for a kWh, to calculate the charge to you for the power that you have used.
What else can I help you with?
How big of heater needed for 10 foot wall room?
10 ft by 10 ft --- a 4 ft baseboard heater will work. But a longer room may need more. 10 ft by 20 ft would need an 8 foot baseboard heater. etc.
How many BTUs in a 6 ft baseboard heater?
The number of BTUs in a 6 ft baseboard heater would depend on the model and specifications of the heater. On average, a 6 ft baseboard heater can generate around 1,000-1,500 BTUs per linear foot, so a 6 ft baseboard heater may produce approximately 6,000-9,000 BTUs.
How much electric baseboard heat is needed for a house?
The amount of electric baseboard heat needed for a house depends on factors like the size of the house, insulation, climate, and personal preferences for room temperatures. A general estimate is that you need 10 watts per square foot, but it's best to consult with an HVAC professional to determine the right amount for your specific needs.
How many btus per foot of baseboard?
The number of BTUs per foot of baseboard heating can vary depending on the type and size of the baseboard unit. Typically, standard hydronic (hot water) baseboard heaters emit around 400 to 600 BTUs per foot, while electric baseboard heaters can produce about 250 to 300 BTUs per foot. The specific output also depends on factors like water temperature and the design of the heater. Always refer to manufacturer specifications for precise information.
What is the formula to calculate how many feet of electric baseboard heat?
To calculate how many feet of electric baseboard heat you need, you can use the formula: Total heat output (in watts) divided by the wattage per linear foot of the baseboard heater. This will give you the total length of baseboard heater required in feet for your specific heating needs.
How many BTU's in each foot of hydronic baseboard?
The BTU output of hydronic baseboard varies depending on factors such as the water temperature and the design of the baseboard. Generally, a standard hydronic baseboard heater can provide approximately 400 to 600 BTUs per foot at a water temperature of 180°F. However, this can be influenced by the specific model and installation conditions, so it's important to consult the manufacturer's specifications for accurate figures.
What size baseboard heater for 600 sq ft?
To determine the size of a baseboard heater for a 600 sq ft area, a common rule of thumb is to allocate about 10 watts per square foot for standard heating needs. Therefore, you would need a heater that provides approximately 6,000 watts (or 6 kW) for that space. However, factors like insulation, ceiling height, and local climate can affect this calculation, so it's wise to consult a heating professional for a more accurate assessment.
What is a fair price per foot to install mdf baseboard on Vancouver Island?
$1.50 / lenear foot
What BTU will one foot of three quarter inch fin tube baseboard hydronic heater produce with 100 degree f water entering?
Most output ranging from 560 to 600 btuh per foot, this is with 170 F water temps. I have no way to know your specifics from where I am.
What is the btu capacity per foot of hot water baseboard?
The BTU capacity per foot of hot water baseboard typically ranges from about 400 to 600 BTUs, depending on factors such as the water temperature, the specific design of the baseboard, and the spacing between the units. Standard baseboard heaters usually have a rated output of around 500 BTUs per foot at a water temperature of 180°F. It's essential to consider the specific model and the installation conditions to determine the exact capacity for a given application.
How much power is a 4 foot baseboard going to consume in a month?
A standard 4 foot baseboard heat will consume 1000 watts/1Kilowatt. So if you could calculate how many hours per day/week/month you can multiply the hours by power consumption and getKWh(Kilowatt Hours) per month.
What would cause a car heater to not blow on the foot setting?
the heater box is under the dashboard most of the time in the middle. The heater blowing system have doors . The door for the foot is next to your leg he have one metal cable could be this come out. If yes, have to clip it back. This electric its more difficult but just check first
